Need a
Repair Manual?
P278C OBD2: Kick Down Switch Circuit Low

P278C OBD2: Kick Down Switch Circuit Low

The P278C OBD-II code indicates an issue with the kick down switch circuit, which plays a vital role in the vehicle’s transmission performance.

What Does the P278C Code Mean?

The P278C code is triggered when the kick down switch sends an implausible signal to the transmission control module (TCM). This switch is essential for indicating when the transmission should downshift, allowing for quicker acceleration.

What Causes the P278C Code?

Several factors can contribute to the P278C code being stored, including:

  • Kick down switch failure
  • Transmission Control Module (TCM) failure
  • Wiring issues related to the kick down switch

What Are the Symptoms of the P278C Code?

Drivers may notice the following symptoms when the P278C code is present:

  • Decreased engine performance
  • Delayed or erratic shifting
  • Possible check engine light illumination

How Serious Is the P278C Code?

The P278C code is classified as moderate severity. While it may not pose an immediate threat to vehicle safety or functionality, it is recommended to have it diagnosed within a reasonable timeframe to prevent further issues.

How to Diagnose the P278C Code

Proper diagnosis of the P278C code should involve:

  • Using an OBD-II scanner to confirm the code
  • Inspecting the kick down switch and associated wiring for damage
  • Testing the functionality of the TCM
  • Verifying the electrical connections and signals

Common Repairs for the P278C Code

Depending on the diagnosis, common repairs might include:

  • Replacing the kick down switch
  • Repairing or replacing damaged wiring
  • Replacing the Transmission Control Module (TCM)

How Much Does It Cost to Fix the P278C Code?

Repair costs for the P278C code can vary widely based on the specific issues found. Generally, you can expect to pay between $100 to $600, depending on whether a simple switch replacement is needed or if more extensive TCM repairs are required.

Can I Fix the P278C Code Myself?

While some DIY enthusiasts may be able to replace the kick down switch or check wiring, diagnosing the TCM often requires specialized tools and knowledge.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;