Need a
Repair Manual?
P2739 OBD2: Pressure Control Solenoid "F" Control Circuit High

P2739 OBD2: Pressure Control Solenoid “F” Control Circuit High

What Does the P2739 Code Mean?

The P2739 code is a diagnostic trouble code (DTC) that indicates an issue with the Pressure Control Solenoid “F” Control Circuit in your vehicle’s transmission system. This code is triggered when the Transmission Control Module (TCM) detects that the control circuit for the pressure control solenoid is operating at a high voltage level, which can lead to transmission malfunctions.

What Causes the P2739 Code?

Several factors can lead to the P2739 code being set, including:

  • Failure of the Transmission Control Module (TCM)
  • Low transmission fluid levels
  • Failure of the transmission shift solenoid
  • Wiring issues, such as shorts or open circuits

What Are the Symptoms of the P2739 Code?

If your vehicle is displaying the P2739 code, you may experience the following symptoms:

  • Transmission may not shift properly
  • Increased fuel consumption

How Serious Is the P2739 Code?

The P2739 code is classified as urgent, indicating that immediate action is necessary. Ignoring this code can lead to severe damage to the vehicle’s transmission system, which can be costly to repair. Additionally, it poses a safety risk to the driver and passengers due to the potential for transmission failure.

How to Diagnose the P2739 Code

To diagnose the P2739 code, a professional mechanic will typically follow these steps:

  1. Use an OBD-II scanner to confirm the presence of the P2739 code.
  2. Inspect the transmission fluid level and condition.
  3. Check the wiring and connectors associated with the pressure control solenoid.
  4. Test the operation of the pressure control solenoid and the TCM.

Common Repairs for the P2739 Code

Common repairs for the P2739 code may include:

  • Replacing the Transmission Control Module (TCM)
  • Refilling or replacing transmission fluid
  • Replacing the faulty transmission shift solenoid
  • Repairing or replacing damaged wiring or connectors

How Much Does It Cost to Fix the P2739 Code?

The cost to fix the P2739 code can vary widely depending on the specific issue and the make and model of the vehicle. On average, repairs can range from $150 to $1,200, with the cost of parts and labor influencing the final price. A detailed diagnosis is recommended to get a more accurate estimate.

Can I Fix the P2739 Code Myself?

While some DIY enthusiasts may attempt to fix the P2739 code themselves, it is crucial to have a solid understanding of automotive systems. Proper diagnosis is essential, as simply replacing parts without addressing the root cause may lead to further issues. For most drivers, seeking professional assistance is the best course of action.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;