Need a
Repair Manual?
P2729 OBD2: Pressure Control Solenoid "E" Control Circuit Low

P2729 OBD2: Pressure Control Solenoid “E” Control Circuit Low

What Does the P2729 Code Mean?

The P2729 OBD-II code indicates that there is a low control circuit issue with the Pressure Control Solenoid “E” in the vehicle’s transmission system. This code is set when the Transmission Control Module (TCM) detects that the solenoids are not functioning electrically as expected.

What Causes the P2729 Code?

Several factors can trigger the P2729 code, including:

  • Transmission Control Module (TCM) failure
  • Low transmission fluid levels
  • Transmission shift solenoid failure
  • Wiring issues within the control circuit

What Are the Symptoms of the P2729 Code?

When the P2729 code is present, drivers may experience the following symptoms:

  • Transmission may not shift properly
  • Increased fuel consumption
  • Vehicle may lag or hesitate during acceleration

How Serious Is the P2729 Code?

The P2729 code is classified as urgent. If ignored, it can lead to severe damage to the transmission, resulting in costly repairs and unsafe driving conditions. Immediate attention to this issue is strongly recommended.

How to Diagnose the P2729 Code

Diagnosing the P2729 code involves several steps:

  1. Use an OBD-II scanner to confirm the P2729 code and check for any additional trouble codes.
  2. Inspect the transmission fluid level and quality. Low or dirty fluid can impact performance.
  3. Examine the wiring and connectors associated with the transmission control solenoid for damage or corrosion.
  4. Test the functionality of the Pressure Control Solenoid “E” and the TCM.

Common Repairs for the P2729 Code

Common repairs for this code may include:

  • Replacing the faulty Pressure Control Solenoid “E”
  • Repairing or replacing damaged wiring or connectors
  • Refilling or flushing the transmission fluid
  • Replacing the Transmission Control Module (if necessary)

How Much Does It Cost to Fix the P2729 Code?

The cost to fix the P2729 code can vary significantly based on the underlying issues. On average, repairs can range from $200 to $1,500, depending on whether you need to replace solenoids, wiring, or the TCM.

Can I Fix the P2729 Code Myself?

While some DIY enthusiasts may be able to address minor issues like fluid levels or wiring checks, diagnosing and repairing transmission-related problems often requires specialized knowledge and tools. If you’re unsure, it’s best to consult a professional mechanic to avoid further complications.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;