Need a
Repair Manual?
P2712 OBD2: Hydraulic Power Unit Leakage

P2712 OBD2: Hydraulic Power Unit Leakage

OBD-II code P2712 refers to a problem within the hydraulic power unit of the vehicle’s transmission. This code indicates that the engine computer (PCM) has detected a hydraulic power unit leakage that may affect the transmission’s performance.

What Does the P2712 Code Mean?

The P2712 code is a diagnostic trouble code (DTC) that signifies a hydraulic power unit leakage. This code is triggered when the PCM monitors the transmission system for leaks and identifies a sudden loss of pressure, indicating a potential leak in the system.

What Causes the P2712 Code?

Several issues can lead to the P2712 code being triggered, including:

  • Internal transmission failure
  • Damaged transmission cooler
  • Low transmission fluid level

What Are the Symptoms of the P2712 Code?

Symptoms of the P2712 code may include:

  • Transmission may not shift properly
  • Increased fuel consumption

How Serious Is the P2712 Code?

The P2712 code is classified as urgent, meaning immediate action is necessary. Ignoring this code can lead to severe damage to the vehicle’s transmission system, potentially resulting in costly repairs and safety risks for the driver and passengers.

How to Diagnose the P2712 Code

To diagnose the P2712 code, a mechanic will typically perform the following steps:

  1. Use an OBD-II scanner to verify the P2712 code and check for any additional codes.
  2. Inspect the transmission fluid level and condition.
  3. Look for visible signs of leaks in the hydraulic system.
  4. Test the transmission cooler and other related components for damage.
  5. Perform a pressure test to determine if there are any leaks within the transmission.

Common Repairs for the P2712 Code

Repairs for the P2712 code may involve:

  • Replacing damaged components within the transmission system.
  • Repairing or replacing the transmission cooler.
  • Refilling or flushing the transmission fluid.
  • Fixing any internal transmission issues.

How Much Does It Cost to Fix the P2712 Code?

The cost to fix the P2712 code can vary widely depending on the specific issue. Basic repairs like fluid replacement may range from $100 to $300, whereas more extensive repairs, such as replacing internal transmission parts, can cost $1,000 or more.

Can I Fix the P2712 Code Myself?

While some aspects of diagnosing and repairing the P2712 code can be done by a knowledgeable DIY enthusiast, it is crucial to have a proper understanding of transmission systems. If you are unsure about the cause or how to fix it, it is highly recommended to consult a professional mechanic to avoid further damage.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;