Need a
Repair Manual?
P2699 OBD2: Exhaust Aftertreatment Fuel Injector "A" Circuit Low

P2699 OBD2: Exhaust Aftertreatment Fuel Injector “A” Circuit Low

The P2699 OBD-II code indicates an issue with the Exhaust Aftertreatment Fuel Injector “A” circuit being low. This code is crucial for maintaining the efficiency and safety of your vehicle’s exhaust system.

What Does the P2699 Code Mean?

The P2699 code signifies that the vehicle’s onboard diagnostic system has detected a low signal from the Exhaust Aftertreatment Fuel Injector “A” circuit. This injector is responsible for injecting Diesel Exhaust Fluid (DEF) into the exhaust stream to help reduce harmful emissions.

What Causes the P2699 Code?

Several factors can trigger the P2699 code, including:

  • DEF injector failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues related to the injector circuit

What Are the Symptoms of the P2699 Code?

Common symptoms associated with the P2699 code include:

  • Decreased engine performance
  • Failure of DPF regeneration

How Serious Is the P2699 Code?

The P2699 code is considered to have moderate severity. While it may not pose an immediate threat to the vehicle’s safety or functionality, it is important to have it diagnosed promptly to prevent further complications and ensure optimal engine performance.

How to Diagnose the P2699 Code

Diagnosing the P2699 code typically involves the following steps:

  1. Use an OBD-II scanner to confirm the presence of the P2699 code and check for any additional codes.
  2. Inspect the wiring and connectors related to the DEF injector for damage or corrosion.
  3. Test the DEF injector to ensure it is operating correctly.
  4. Check the Powertrain Control Module (PCM) for proper functionality.

Common Repairs for the P2699 Code

Repairs for the P2699 code may include:

  • Replacing the DEF injector
  • Repairing or replacing damaged wiring or connectors
  • Replacing the Powertrain Control Module (PCM) if found faulty

How Much Does It Cost to Fix the P2699 Code?

The cost to fix the P2699 code can vary widely depending on the specific issue. On average, repairs may range from $150 to $1,000, depending on whether you need to replace the DEF injector, wiring, or the PCM.

Can I Fix the P2699 Code Myself?

While some DIY mechanics may be able to address simple wiring issues or replace the DEF injector, diagnosing and repairing issues related to the PCM often requires specialized knowledge and equipment. If you’re unsure, it is advisable to consult a certified mechanic.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;