Need a
Repair Manual?
P264D OBD2: "A" Rocker Arm Actuator Position Sensor Circuit High

P264D OBD2: “A” Rocker Arm Actuator Position Sensor Circuit High

What Does the P264D Code Mean?

The P264D code indicates that there is a high voltage issue in the “A” Rocker Arm Actuator Position Sensor Circuit. This code is part of the OBD-II system used to diagnose issues with vehicle engines.

What Causes the P264D Code?

This code is often triggered by a failure in the variable valve lift system, which is designed to optimize airflow through the engine at higher RPMs. The internal position sensors in the rocker arm assembly can fail, leading to the P264D code being set. Other potential causes include:

  • Powertrain Control Module (PCM) failure
  • Variable valve lift controller assembly failure
  • Wiring issues

What Are the Symptoms of the P264D Code?

When the P264D code is present, you may experience:

  • Decreased engine performance
  • Increased fuel consumption

How Serious Is the P264D Code?

The P264D code is classified as urgent and indicates that immediate action is necessary. Ignoring this code can lead to severe damage to the vehicle or potential harm to the driver and passengers.

How to Diagnose the P264D Code

To properly diagnose the P264D code, a thorough diagnostic routine should be conducted. This typically involves:

  • Using an OBD-II scanner to confirm the code
  • Checking the wiring and connectors for damage
  • Testing the rocker arm actuator and associated sensors
  • Evaluating the PCM for faults

Common Repairs for the P264D Code

Common repairs for the P264D code may include:

  • Replacing the variable valve lift controller assembly
  • Fixing wiring issues or poor connections
  • Replacing the PCM if it is found to be defective

How Much Does It Cost to Fix the P264D Code?

The cost to fix the P264D code can vary widely based on the specific issue and the labor rates in your area. On average, repairs can range from $150 to $1,000, depending on whether components need to be replaced or repaired.

Can I Fix the P264D Code Myself?

While some experienced DIY mechanics may be able to tackle repairs related to the P264D code, it is crucial to have a good understanding of engine diagnostics and electronics. If you are not confident in your skills, it is recommended to seek professional assistance to avoid further damage.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;