Need a
Repair Manual?
P2514 OBD2: Event Data Recorder Request Circuit High

P2514 OBD2: Event Data Recorder Request Circuit High

The P2514 OBD-II code indicates a problem with the event data recorder (EDR) request circuit in your vehicle. This code is categorized as a moderate severity issue, which means it may not pose an immediate threat to safety or functionality, but it should be addressed promptly to ensure optimal vehicle performance.

What Does the P2514 Code Mean?

The P2514 code signifies that the onboard computer has detected a high voltage in the event data recorder request circuit. This circuit is responsible for monitoring and recording driving habits and may be part of a larger onboard flight recorder system.

What Causes the P2514 Code?

There are several potential causes for the P2514 code, including:

  • Event data recorder module failure
  • Wiring issues within the circuit

What Are the Symptoms of the P2514 Code?

While the P2514 code may not trigger noticeable symptoms, some drivers might experience:

  • Check Engine Light illumination
  • Inability to access recorded driving data
  • Other related fault codes in the event data recorder system

How Serious Is the P2514 Code?

The P2514 code is considered to have moderate severity. While it may not affect the immediate safety or functionality of your vehicle, ignoring it could lead to more significant issues down the road. Therefore, it’s advisable to have it diagnosed and repaired within a reasonable timeframe.

How to Diagnose the P2514 Code

A qualified mechanic will typically follow these steps to diagnose the P2514 code:

  1. Use an OBD-II scanner to confirm the presence of the P2514 code.
  2. Inspect the wiring and connections associated with the event data recorder.
  3. Test the event data recorder module for proper functionality.
  4. Check for any additional fault codes that may provide more context.

Common Repairs for the P2514 Code

Repairs for the P2514 code may include:

  • Replacing a faulty event data recorder module
  • Repairing or replacing damaged wiring or connectors
  • Clearing the code and re-evaluating system functionality

How Much Does It Cost to Fix the P2514 Code?

The cost to repair the P2514 code can vary widely depending on the specific issue and labor costs in your area. On average, you might expect to pay between $100 to $300 for diagnostic services and repairs, especially if module replacement is needed.

Can I Fix the P2514 Code Myself?

If you have experience with automotive repairs and access to the necessary tools, you may be able to address minor wiring issues or replace the event data recorder module yourself. However, for most drivers, it’s recommended to seek professional help to ensure a proper diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;