Need a
Repair Manual?
P2335 OBD2: Ignition Coil "L" Secondary Circuit

P2335 OBD2: Ignition Coil “L” Secondary Circuit

The P2335 code is a diagnostic trouble code (DTC) that indicates an issue with the ignition coil “L” secondary circuit. This code is part of the OBD-II system, which is used to monitor the performance of the vehicle’s engine and its components.

What Does the P2335 Code Mean?

The P2335 code signifies that the engine control module (PCM) has detected a problem with the secondary circuit of the ignition coil “L”. This secondary circuit is critical for igniting the air/fuel mixture in the combustion chambers. If the PCM cannot control the ignition coil properly, it will trigger this trouble code.

What Causes the P2335 Code?

Several issues can lead to the P2335 code, including:

  • Ignition coil failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues related to the ignition coil circuit

What Are the Symptoms of the P2335 Code?

Common symptoms associated with the P2335 code include:

  • Decreased engine performance
  • Increased fuel consumption
  • Engine stumbling or misfiring

How Serious Is the P2335 Code?

The P2335 code is classified as urgent. It indicates a significant malfunction that can lead to severe engine damage if not addressed promptly. Ignoring this code can compromise vehicle safety and increase repair costs.

How to Diagnose the P2335 Code

To diagnose the P2335 code, follow these steps:

  1. Use an OBD-II scanner to confirm the presence of the P2335 code and check for any additional codes.
  2. Inspect the ignition coil and its wiring for any visible damage or corrosion.
  3. Test the ignition coil with a multimeter to determine if it is functioning correctly.
  4. Check the PCM for proper operation and ensure it is receiving the correct signals.
  5. Perform a thorough visual inspection of the entire ignition system to identify any other potential issues.

Common Repairs for the P2335 Code

Repairs for the P2335 code may include:

  • Replacing the faulty ignition coil
  • Repairing or replacing damaged wiring
  • Replacing the Powertrain Control Module (if found defective)

How Much Does It Cost to Fix the P2335 Code?

The cost to fix the P2335 code can vary widely depending on the underlying issue. On average, you can expect to pay between $100 to $600 for repairs, which may include parts and labor. If the ignition coil needs replacement, costs may lean toward the higher end of this range.

Can I Fix the P2335 Code Myself?

If you have some mechanical experience and the proper tools, you may be able to fix the P2335 code yourself, especially if it involves replacing an ignition coil. However, it’s crucial to conduct a full diagnostic to ensure you are addressing the correct issue. If you are uncertain, it is always best to consult with a professional mechanic.

About JC Landry

JC spent 15+ years as a certified Master Mechanic before trading the shop for the keyboard. He's worked across dealerships, owned and operated his own independent garage, and consulted on automotive trade school curricula, reviewing technical textbooks used in vocational programs. He now serves as Editor-in-Chief at eManualOnline.com, where he oversees the platform's technical content. He's one of the few voices in automotive publishing who has actually turned wrenches professionally on the vehicles he covers. He didn't learn automotive repair to write about it. He learned to write after spending over a decade doing it.

Leave a Reply

Your email address will not be published. Required fields are marked *

;