Need a
Repair Manual?
P2316 OBD2: Ignition Coil "F" Primary Control Circuit High

P2316 OBD2: Ignition Coil “F” Primary Control Circuit High

The P2316 OBD-II code indicates a problem with the ignition coil “F” primary control circuit being too high. This code is a part of the On-Board Diagnostics II (OBD-II) system, which monitors the performance of various components in the vehicle.

What Does the P2316 Code Mean?

The P2316 code signifies that the engine control module (PCM) has detected an issue with the ignition coil’s control circuit. Specifically, it indicates that the voltage in the primary circuit of ignition coil “F” is higher than expected, which can lead to poor engine performance.

What Causes the P2316 Code?

Several factors can trigger the P2316 code, including:

  • Ignition coil failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues that lead to short circuits or open circuits in the ignition coil circuit

What Are the Symptoms of the P2316 Code?

When the P2316 code is present, you may experience the following symptoms:

  • Decreased engine performance
  • Increased fuel consumption
  • Engine stumbling or misfiring

How Serious Is the P2316 Code?

The P2316 code is considered urgent. It indicates a significant malfunction that can lead to severe engine damage if not addressed promptly. Ignoring this code can result in poor engine performance, increased emissions, and potential safety hazards for the driver and passengers.

How to Diagnose the P2316 Code

To accurately diagnose the P2316 code, follow these steps:

  1. Use an OBD-II scanner to confirm the P2316 code and check for additional codes that may be present.
  2. Inspect the ignition coil and related wiring for any visible damage, corrosion, or loose connections.
  3. Test the ignition coil’s resistance and verify its operation.
  4. Check the PCM for any faults or software updates that may be necessary.

Common Repairs for the P2316 Code

Typical repairs for the P2316 code may include:

  • Replacing the faulty ignition coil
  • Repairing or replacing damaged wiring or connectors
  • Reprogramming or replacing the PCM if necessary

How Much Does It Cost to Fix the P2316 Code?

The cost to fix the P2316 code can vary widely depending on the specific issue. On average, you may expect to pay between $100 and $500, which includes diagnostic fees and parts replacement. The cost may increase if the PCM needs reprogramming or replacement.

Can I Fix the P2316 Code Myself?

While some experienced DIYers may be able to address the P2316 code by replacing the ignition coil or repairing wiring issues, it is essential to have a good understanding of automotive electrical systems. If you are unsure or lack the necessary tools, it is advisable to seek professional help to ensure proper diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;