Need a
Repair Manual?
P2307 OBD2: Ignition Coil "C" Primary Control Circuit High

P2307 OBD2: Ignition Coil “C” Primary Control Circuit High

The P2307 code is an OBD-II trouble code that indicates a problem with the ignition coil “C” primary control circuit. This code signifies that the Engine Control Module (PCM) has detected a high voltage in the circuit that controls the ignition coil, which can lead to significant engine issues.

What Does the P2307 Code Mean?

The P2307 code means that the PCM is unable to control the ignition coil “C” properly due to a high voltage in the primary control circuit. The ignition coil is responsible for igniting the air/fuel mixture within the combustion chambers, and any malfunction in this circuit can severely affect engine performance.

What Causes the P2307 Code?

Several factors can trigger the P2307 code, including:

  • Ignition coil failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues in the ignition circuit

What Are the Symptoms of the P2307 Code?

Common symptoms associated with the P2307 code include:

  • Decreased engine performance
  • Increased fuel consumption
  • Engine stumbling or misfiring

How Serious Is the P2307 Code?

The P2307 code is classified as urgent. If not addressed promptly, it can lead to severe damage to the engine and can pose safety risks to the driver and passengers. Delaying repairs can result in more extensive and costly repairs down the line.

How to Diagnose the P2307 Code

To diagnose the P2307 code, follow these steps:

  1. Use an OBD-II scanner to confirm the P2307 code and check for any additional codes.
  2. Inspect the ignition coil and wiring for any signs of damage or wear.
  3. Test the ignition coil’s resistance and the voltage output from the PCM.
  4. Check the PCM for proper functionality.

Common Repairs for the P2307 Code

Common repairs that may be needed for the P2307 code include:

  • Replacing the faulty ignition coil
  • Repairing or replacing damaged wiring in the ignition circuit
  • Replacing the PCM if it is found to be defective

How Much Does It Cost to Fix the P2307 Code?

The cost to fix the P2307 code can vary widely based on the specific issue and your vehicle model. On average, repairs may range from $100 to $600, depending on whether you need to replace the ignition coil or any wiring components.

Can I Fix the P2307 Code Myself?

While some DIY enthusiasts may be able to handle simple repairs like replacing an ignition coil, diagnosing the issue thoroughly often requires specialized tools and knowledge. If you are not experienced in automotive repairs, it’s advisable to consult a professional mechanic to ensure proper diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;