Need a
Repair Manual?
P2274 OBD2: O2 Sensor Signal Biased/Stuck Lean

P2274 OBD2: O2 Sensor Signal Biased/Stuck Lean (Bank 1 Sensor 3)

The P2274 code is an OBD-II diagnostic trouble code that indicates an issue with the oxygen sensor signal, specifically that it is biased or stuck lean. This code is generated when the engine’s control module (PCM) detects that the oxygen sensor is not fluctuating as expected, which can affect engine performance and emissions.

What Does the P2274 Code Mean?

When the P2274 code is triggered, it means that the oxygen sensor responsible for measuring the amount of oxygen in the exhaust is reporting a lean condition. This means that there is more oxygen in the exhaust gases than what is considered normal, which may indicate a problem in the fuel system or a malfunctioning sensor.

What Causes the P2274 Code?

  • Oxygen sensor failure
  • Powertrain Control Module (PCM) failure
  • Vacuum leak in the intake system
  • Wiring issues related to the oxygen sensor

What Are the Symptoms of the P2274 Code?

  • Decreased engine performance
  • Increased fuel consumption
  • Check engine light illuminated

How Serious Is the P2274 Code?

The P2274 code has a moderate severity level. While it may not pose an immediate threat to the vehicle’s safety or functionality, it is important to address it promptly to prevent further issues, such as decreased engine performance and increased emissions.

How to Diagnose the P2274 Code

To diagnose the P2274 code, a mechanic will typically follow these steps:

  1. Use an OBD-II scanner to confirm the P2274 code and check for any other related codes.
  2. Inspect the oxygen sensor and its wiring for any visible damage or disconnection.
  3. Check for vacuum leaks in the intake system that could be causing a lean condition.
  4. Test the oxygen sensor’s voltage output to ensure it is fluctuating correctly.
  5. Evaluate the PCM for any faults that may be affecting its function.

Common Repairs for the P2274 Code

  • Oxygen sensor replacement
  • Repair or replace damaged wiring
  • Fix vacuum leaks in the intake system
  • Replace the PCM if found to be faulty

How Much Does It Cost to Fix the P2274 Code?

The cost to repair the P2274 code can vary widely depending on the specific issue and the make/model of the vehicle. Typically, oxygen sensor replacement can range from $100 to $300, including parts and labor. If additional repairs are needed, such as fixing wiring or vacuum leaks, the cost may increase accordingly.

Can I Fix the P2274 Code Myself?

While some DIY enthusiasts may be able to replace an oxygen sensor or fix minor wiring issues, diagnosing and repairing the P2274 code requires a certain level of automotive expertise. If you’re not experienced with vehicle diagnostics, it may be best to consult with a certified mechanic to ensure a proper fix.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;