Need a
Repair Manual?
P2267 OBD2: Water in Fuel Sensor Circuit High

P2267 OBD2: Water in Fuel Sensor Circuit High

P2267 is an OBD-II diagnostic trouble code that indicates a problem with the water in fuel sensor circuit. This code is typically set when the Powertrain Control Module (PCM) detects a high voltage signal from the water in fuel sensor.

What Does the P2267 Code Mean?

The P2267 code signifies that the PCM has detected a fault in the water in fuel sensor circuit, which is critical for diesel engines to monitor water contamination levels in the fuel. If the sensor circuit is reporting high voltage, it suggests that the PCM believes there is excessive water present, or that the sensor itself is malfunctioning.

What Causes the P2267 Code?

This code can be triggered by several factors, including:

  • Powertrain Control Module (PCM) failure
  • Wiring issues, such as damaged or corroded wiring

What Are the Symptoms of the P2267 Code?

Common symptoms associated with the P2267 code include:

  • Illumination of the water in fuel warning light

How Serious Is the P2267 Code?

The P2267 code is classified as urgent, indicating that immediate attention is necessary. Ignoring this code could lead to severe damage to the vehicle’s engine or fuel system, and could pose a safety risk to the driver and passengers.

How to Diagnose the P2267 Code

To diagnose the P2267 code, a mechanic should follow a complete diagnostic routine, which may include:

  1. Using an OBD-II scanner to confirm the code
  2. Inspecting the wiring and connectors of the water in fuel sensor
  3. Testing the water in fuel sensor for proper operation
  4. Checking the PCM for faults or updates

Common Repairs for the P2267 Code

Depending on the diagnosis, common repairs may include:

  • Replacing the water in fuel sensor
  • Repairing or replacing damaged wiring and connectors
  • Reprogramming or replacing the PCM if necessary

How Much Does It Cost to Fix the P2267 Code?

The cost to fix the P2267 code can vary widely based on the underlying issue. Typical repair costs may range from $100 to $500, depending on whether a sensor replacement, wiring repair, or PCM replacement is required.

Can I Fix the P2267 Code Myself?

While some car enthusiasts may be able to diagnose and repair minor wiring issues, it is recommended to have a professional mechanic handle this code due to the complexity of the fuel system and the potential risks involved.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;