Need a
Repair Manual?
P216C OBD2: Fuel Injector Group "E" Supply Voltage Circuit High

P216C OBD2: Fuel Injector Group “E” Supply Voltage Circuit High

What Does the P216C Code Mean?

The P216C code is a diagnostic trouble code that indicates a high voltage issue within the fuel injector group “E” supply circuit. This code is triggered when the Powertrain Control Module (PCM) detects that the fuel injectors in this group are not functioning correctly, potentially leading to engine performance issues.

What Causes the P216C Code?

  • Fuel injector failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues or short circuits in the fuel injector circuit

What Are the Symptoms of the P216C Code?

  • Engine may run rough
  • Potential loss of power or acceleration
  • Increased fuel consumption

How Serious Is the P216C Code?

The P216C code is considered urgent as it indicates significant malfunctions that can lead to severe damage to the vehicle. Immediate action is necessary to prevent further damage and ensure the safety of the driver and passengers.

How to Diagnose the P216C Code

Diagnosing the P216C code involves a series of steps:

  1. Use an OBD-II scanner to confirm the P216C code and check for any other related codes.
  2. Inspect the wiring and connectors associated with the fuel injectors for signs of damage or corrosion.
  3. Test the fuel injectors to verify their functionality using a multimeter.
  4. Examine the PCM for any faults or malfunctions.

Common Repairs for the P216C Code

  • Replacing faulty fuel injectors
  • Repairing or replacing damaged wiring and connectors
  • Replacing or reprogramming the Powertrain Control Module (PCM)

How Much Does It Cost to Fix the P216C Code?

The cost to fix the P216C code can vary significantly based on the underlying cause. Repair costs can range from $100 for simple wiring repairs to over $1,000 if the PCM needs replacement or reprogramming.

Can I Fix the P216C Code Myself?

While some basic repairs, such as inspecting and replacing wiring, can be done by car owners with mechanical knowledge, diagnosing the PCM or replacing injectors typically requires professional assistance. It’s advisable to consult a qualified mechanic for a thorough diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;