Need a
Repair Manual?
P2155 OBD2: Fuel Injector Group "D" Supply Voltage Circuit/Open

P2155 OBD2: Fuel Injector Group “D” Supply Voltage Circuit/Open

The P2155 OBD-II code indicates an issue with the fuel injector group “D” supply voltage circuit. This fault code is critical as it signifies a malfunction in the fuel injection system.

What Does the P2155 Code Mean?

The P2155 code is set when the engine control module (PCM) detects that there is a fault in the fuel injector group “D” supply voltage circuit. This could mean that the circuit is open, which prevents the injectors from receiving the necessary voltage to operate correctly.

What Causes the P2155 Code?

Several factors can lead to the P2155 code being triggered, including:

  • Fuel injector failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues within the fuel injector circuit

What Are the Symptoms of the P2155 Code?

The main symptom associated with the P2155 code is:

  • Engine may run rough

This rough running can indicate that the fuel injectors are not delivering fuel properly, leading to performance issues.

How Serious Is the P2155 Code?

The P2155 code is considered urgent. Ignoring this code could lead to severe damage to the vehicle’s engine components or pose safety risks to the driver and passengers. Immediate attention is necessary to prevent further complications.

How to Diagnose the P2155 Code

To diagnose the P2155 code, a mechanic will typically follow these steps:

  1. Use an OBD-II scanner to confirm the presence of the P2155 code.
  2. Inspect the wiring and connectors associated with the fuel injectors for any visible damage.
  3. Test the fuel injectors for proper function and continuity.
  4. Check the PCM for any faults or issues that may be affecting its performance.

Common Repairs for the P2155 Code

Common repairs when dealing with the P2155 code may include:

  • Replacing faulty fuel injectors
  • Repairing or replacing damaged wiring or connectors
  • Replacing the Powertrain Control Module (PCM) if it is determined to be faulty

How Much Does It Cost to Fix the P2155 Code?

The cost of repairing the P2155 code can vary widely depending on the underlying cause. On average, repairs can range from $100 to $1,000 or more, depending on whether it involves simple wiring repairs or a more expensive PCM replacement.

Can I Fix the P2155 Code Myself?

If you have automotive repair experience and the necessary tools, you may be able to diagnose and fix the P2155 code yourself. However, due to the complexity of the fuel injection system and the potential for further damage, it is often recommended to seek professional assistance for a definitive diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;