Need a
Repair Manual?
P20D7 OBD2: Exhaust Aftertreatment Fuel Supply Control Circuit/Open

P20D7 OBD2: Exhaust Aftertreatment Fuel Supply Control Circuit/Open

The P20D7 code is a diagnostic trouble code (DTC) that indicates a problem with the exhaust aftertreatment fuel supply control circuit. This code is primarily associated with diesel engines that utilize Diesel Exhaust Fluid (DEF) to reduce harmful emissions.

What Does the P20D7 Code Mean?

The P20D7 code signifies that there is an issue with the exhaust aftertreatment fuel supply control circuit, which may be open or malfunctioning. This involves the system that injects DEF into the exhaust stream to assist in the conversion of harmful exhaust particles into harmless gases.

What Causes the P20D7 Code?

Several factors may cause the P20D7 code to trigger, including:

  • DEF pump failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues in the DEF system
  • Faulty DEF injector

What Are the Symptoms of the P20D7 Code?

Symptoms associated with the P20D7 code may include:

  • DPF regeneration may not occur
  • Check engine light illuminated
  • Decreased engine performance
  • Increased emissions

How Serious Is the P20D7 Code?

The P20D7 code is considered to be of moderate severity. While it may not pose an immediate threat to the vehicle’s safety or functionality, it should be diagnosed and addressed promptly to avoid further complications and ensure optimal engine performance.

How to Diagnose the P20D7 Code

To properly diagnose the P20D7 code, a mechanic will typically perform the following steps:

  1. Use an OBD-II scanner to confirm the presence of the P20D7 code.
  2. Inspect the DEF system for any visible signs of damage or leaks.
  3. Test the DEF pump and wiring for proper operation.
  4. Check the PCM for faults or software issues.
  5. Perform a thorough diagnostic scan to identify any additional trouble codes.

Common Repairs for the P20D7 Code

Common repairs to resolve the P20D7 code may include:

  • Replacing a faulty DEF pump
  • Repairing or replacing damaged wiring
  • Reprogramming or replacing the PCM
  • Replacing the DEF injector, if necessary

How Much Does It Cost to Fix the P20D7 Code?

The cost to fix the P20D7 code can vary widely depending on the specific issue and the vehicle make and model. Generally, repairs can range from $100 to $1,500. A simple wiring repair may be on the lower end, while replacing the DEF pump or PCM can be significantly more expensive.

Can I Fix the P20D7 Code Myself?

While some experienced DIYers may be able to diagnose and repair simple issues related to the P20D7 code, it is recommended to seek professional assistance. The DEF system is complex, and improper repairs can lead to further problems or engine damage.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;