Need a
Repair Manual?
P20D4 OBD2: Exhaust Aftertreatment Fuel Injector "B" Control Circuit High

P20D4 OBD2: Exhaust Aftertreatment Fuel Injector “B” Control Circuit High

What Does the P20D4 Code Mean?

The P20D4 code is triggered when the Powertrain Control Module (PCM) detects a high voltage in the control circuit of the Exhaust Aftertreatment Fuel Injector “B”. This injector is crucial for managing Diesel Exhaust Fluid (DEF), which helps in reducing harmful emissions from the vehicle.

What Causes the P20D4 Code?

Several factors can contribute to the P20D4 code being set, including:

  • DEF injector failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues related to the injector circuit

Each of these issues can disrupt the normal function of the exhaust aftertreatment system, leading to the generation of this code.

What Are the Symptoms of the P20D4 Code?

When the P20D4 code is present, you may notice the following symptoms:

  • DPF (Diesel Particulate Filter) regeneration may not occur
  • Check Engine Light illuminated on the dashboard
  • Possible decrease in fuel efficiency
  • Increased emissions

These symptoms can indicate that your vehicle’s exhaust system is not functioning as it should, which can lead to further complications if not addressed.

How Serious Is the P20D4 Code?

The severity of the P20D4 code is considered moderate. While it may not pose an immediate threat to your vehicle’s safety or drivability, it is important to have it diagnosed and repaired in a timely manner. Ignoring the issue could lead to more significant problems down the line.

How to Diagnose the P20D4 Code

Diagnosing the P20D4 code typically involves the following steps:

  1. Using an OBD-II scanner to confirm the presence of the P20D4 code.
  2. Inspecting wiring and connectors related to the DEF injector for any signs of damage or corrosion.
  3. Testing the DEF injector for proper operation.
  4. Checking the Powertrain Control Module for any faults or failures.

A thorough diagnosis by a certified technician is recommended to pinpoint the exact cause of the code.

Common Repairs for the P20D4 Code

Common repairs for addressing the P20D4 code may include:

  • Replacing a faulty DEF injector
  • Repairing or replacing damaged wiring or connectors
  • Reprogramming or replacing the Powertrain Control Module (PCM)

Each repair will depend on the specific cause identified during diagnosis.

How Much Does It Cost to Fix the P20D4 Code?

The cost to repair the P20D4 code can vary widely based on the underlying issue. On average, you might expect to pay anywhere from $200 to $1,500. This range accounts for parts, labor, and any additional diagnostic fees. It’s advisable to obtain quotes from certified repair shops to get a more accurate estimate.

Can I Fix the P20D4 Code Myself?

While some DIY enthusiasts may be able to handle minor wiring issues or replace the DEF injector, diagnosing the root cause of the P20D4 code often requires specialized equipment and expertise. If you are not experienced with automotive repairs, it is recommended to seek help from a professional mechanic to ensure accurate diagnosis and repairs.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;