Need a
Repair Manual?
P2092 OBD2: "A" Camshaft Position Actuator Control Circuit Low

P2092 OBD2: “A” Camshaft Position Actuator Control Circuit Low

The P2092 OBD-II code indicates a problem with the “A” camshaft position actuator control circuit. This code is associated with the variable timing system that adjusts the timing of the camshaft in relation to the crankshaft to enhance fuel efficiency and performance.

What Does the P2092 Code Mean?

The P2092 code signifies that the Powertrain Control Module (PCM) has detected that the camshaft is not positioned correctly concerning the crankshaft. This misalignment can lead to decreased engine performance and increased fuel consumption.

What Causes the P2092 Code?

Several factors can trigger the P2092 code, including:

  • Powertrain Control Module (PCM) failure
  • Variable valve timing actuator failure
  • Wiring issues

What Are the Symptoms of the P2092 Code?

When the P2092 code is triggered, you may experience the following symptoms:

  • Decreased engine performance
  • Increased fuel consumption

How Serious Is the P2092 Code?

The P2092 code is classified as urgent. Immediate action is necessary as this malfunction can lead to severe engine damage or compromise the safety of the vehicle’s occupants.

How to Diagnose the P2092 Code

To properly diagnose the P2092 code, follow these steps:

  1. Use an OBD-II scanner to confirm the presence of the P2092 code.
  2. Inspect the wiring and connectors related to the camshaft position actuator.
  3. Check the variable valve timing actuator for proper operation.
  4. Test the Powertrain Control Module (PCM) for faults.

Common Repairs for the P2092 Code

Common repairs needed to resolve the P2092 code may include:

  • Replacing the variable valve timing actuator
  • Repairing or replacing damaged wiring
  • Replacing the Powertrain Control Module (PCM)
  • Performing an oil and filter change (if necessary)

How Much Does It Cost to Fix the P2092 Code?

The cost to repair the P2092 code can vary significantly based on the underlying issue. Expect to pay anywhere from $100 to $1,500, depending on whether you need to replace the actuator, repair wiring, or replace the PCM.

Can I Fix the P2092 Code Myself?

While some DIY enthusiasts may attempt to fix the P2092 code, it’s important to note that proper diagnosis and repair can be complex. If you’re not experienced with automotive repairs, it is advisable to seek professional assistance to avoid further damage to your vehicle.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;