Need a
Repair Manual?
P07BB OBD2: Transmission Park Position Sensor/Switch "B" Circuit

P07BB OBD2: Transmission Park Position Sensor/Switch “B” Circuit

The P07BB OBD-II code indicates a problem with the Transmission Park Position Sensor or Switch “B” Circuit. This code is vital for the proper functioning of your vehicle’s transmission system, especially when it comes to shifting gears safely.

What Does the P07BB Code Mean?

The P07BB code is triggered when the Powertrain Control Module (PCM) detects an incorrect signal from the Transmission Park Position Sensor. This sensor is responsible for informing the PCM that the vehicle is in the ‘park’ position. If the signal is faulty, the PCM will set the P07BB code to alert the driver of a potential issue.

What Causes the P07BB Code?

There are several factors that can lead to the P07BB code being triggered, including:

  • Failure of the Transmission Park Position Sensor
  • Issues with the wiring connected to the sensor
  • Malfunction of the Powertrain Control Module (PCM)

What Are the Symptoms of the P07BB Code?

Drivers may experience the following symptoms when the P07BB code is present:

  • The transmission may not shift out of park

How Serious Is the P07BB Code?

The P07BB code is classified as urgent. Immediate action is necessary, as it can lead to severe damage to the vehicle or pose safety risks to the driver and passengers. Ignoring this code could result in the inability to shift the vehicle out of park, which can be quite hazardous.

How to Diagnose the P07BB Code

Proper diagnosis of the P07BB code involves a series of steps:

  1. Use an OBD-II scanner to confirm the presence of the P07BB code.
  2. Inspect the wiring and connectors for any visible damage or corrosion.
  3. Test the Transmission Park Position Sensor for proper functionality.
  4. Check the Powertrain Control Module for any faults.

Common Repairs for the P07BB Code

The following repairs may be needed to resolve the P07BB code:

  • Replacing the Transmission Park Position Sensor
  • Repairing or replacing damaged wiring or connectors
  • Reprogramming or replacing the Powertrain Control Module

How Much Does It Cost to Fix the P07BB Code?

The cost to fix the P07BB code can vary significantly based on the underlying issue:

  • Transmission Park Position Sensor replacement: $100 – $300
  • Wiring repair: $50 – $150
  • PCM replacement: $500 – $1,500

Can I Fix the P07BB Code Myself?

While some DIY enthusiasts may attempt to fix the P07BB code, it’s important to proceed with caution. Proper diagnosis requires specific tools and knowledge. If you’re not confident in your abilities, it’s advisable to seek professional help to avoid potential further damage to your vehicle.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;