Need a
Repair Manual?
P0722 OBD2: Output Speed Sensor Circuit No Signal

P0722 OBD2: Output Speed Sensor Circuit No Signal

The OBD-II Code P0722 refers to a malfunction in the Output Speed Sensor circuit, indicating that no signal is being received. This error is crucial as it can lead to significant issues with the vehicle’s transmission.

What Does the P0722 Code Mean?

When the P0722 code is set in the Powertrain Computer (PCM), it means that the computer is not receiving a consistent speed signal from the Output Speed Sensor. This sensor provides important data to the Transmission Control Module (TCM) to ensure the correct gear is engaged.

What Causes the P0722 Code?

  • Defective Output Speed Sensor
  • Defective Shift Solenoids
  • Defective Engine Coolant Temperature Sensor
  • Defective Valve Body
  • Dirty transmission fluid that restricts hydraulic passages
  • Wiring or connector issues with the Output Speed Sensor

What Are the Symptoms of the P0722 Code?

  • Check Engine Light illumination
  • Improper vehicle shifting
  • Decrease in fuel economy
  • Potential performance issues, such as stalling when decelerating
  • In some cases, no noticeable symptoms may be present

How Serious Is the P0722 Code?

The P0722 code is classified as urgent. If not addressed promptly, it can lead to severe damage to the vehicle’s transmission and may compromise the safety of the driver and passengers.

How to Diagnose the P0722 Code

Diagnosing the P0722 code begins with recording freeze frame data. A test drive is essential to replicate the conditions under which the code was triggered. Key factors to monitor include engine load, throttle position, RPM, and road speed as the code can be challenging to detect.

Common Repairs for the P0722 Code

  • Replacing the Output Speed Sensor
  • Repairing or replacing faulty wiring or connectors
  • Changing the transmission fluid if it is dirty
  • Replacing defective shift solenoids or valve body components

How Much Does It Cost to Fix the P0722 Code?

The cost to repair the P0722 code can vary widely depending on the specific issue. Simple sensor replacements may cost between $100 and $300, while more extensive repairs involving transmission components could run from $500 to $1,500 or more.

Can I Fix the P0722 Code Myself?

While some DIY enthusiasts may tackle the replacement of the Output Speed Sensor or inspect wiring, diagnosing transmission-related issues often requires specialized knowledge and tools. If you’re not experienced with automatic transmissions, it’s advisable to seek professional assistance to avoid further complications.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;