Need a
Repair Manual?
P06B4 OBD2: Sensor Power Supply "B" Circuit Low

P06B4 OBD2: Sensor Power Supply “B” Circuit Low

What Does the P06B4 Code Mean?

The P06B4 code signifies that the Powertrain Control Module (PCM) has detected a low voltage condition in the Sensor Power Supply “B” circuit. This can lead to various sensor malfunctions as the PCM supplies power to all the sensors in the vehicle.

What Causes the P06B4 Code?

Several factors can trigger the P06B4 code, including:

  • Powertrain Control Module (PCM) failure
  • Wiring issues, such as damaged or corroded wires that disrupt the power supply

What Are the Symptoms of the P06B4 Code?

Symptoms associated with the P06B4 code may include:

  • Check Engine Light illuminated
  • Failure of one or more vehicle sensors
  • Possible engine performance issues

How Serious Is the P06B4 Code?

The severity of the P06B4 code is considered moderate. While it may not pose an immediate threat to the vehicle’s safety or functionality, it is essential to diagnose and address the issue promptly to prevent more serious problems down the line.

How to Diagnose the P06B4 Code

Diagnosing the P06B4 code typically involves the following steps:

  1. Using an OBD-II scanner to confirm the presence of the P06B4 code
  2. Inspecting the wiring and connections associated with the sensor power supply circuit
  3. Testing the PCM to ensure it is functioning correctly

Common Repairs for the P06B4 Code

Repairs may vary based on the root cause but can include:

  • Replacing a faulty Powertrain Control Module (PCM)
  • Repairing or replacing damaged wiring or connectors
  • Clearing any fault codes and retesting the system

How Much Does It Cost to Fix the P06B4 Code?

Repair costs for the P06B4 code can range significantly, depending on the specific issue:

  • Diagnosing the problem may cost between $100 to $150.
  • Replacing a PCM can range from $500 to $1,500, depending on the make and model of the vehicle.
  • Wiring repairs may cost between $100 and $300.

Can I Fix the P06B4 Code Myself?

While some DIY enthusiasts may address minor wiring issues, diagnosing and replacing a PCM generally requires specialized tools and knowledge. It’s advisable to consult a certified shop for a proper diagnosis and repair to ensure your vehicle runs smoothly.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;