Need a
Repair Manual?
P0628 OBD2: Fuel Pump "A" Control Circuit Low

P0628 OBD2: Fuel Pump “A” Control Circuit Low

The P0628 OBD-II code indicates an issue with the fuel pump control circuit, specifically that the circuit is registering a low voltage. This problem can lead to significant engine performance issues and needs to be addressed promptly.

What Does the P0628 Code Mean?

The P0628 code is triggered when the Engine Control Module (PCM) detects that the fuel pump is not operating correctly, potentially due to low voltage in the control circuit. This can disrupt the fuel delivery process, affecting the engine’s performance.

What Causes the P0628 Code?

Several issues can lead to the P0628 code being set, including:

  • Fuel pump failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues or shorts in the fuel pump circuit

What Are the Symptoms of the P0628 Code?

When the P0628 code is present, you may experience the following symptoms:

  • Decreased engine performance
  • Engine may not start
  • Unusual engine noises

How Serious Is the P0628 Code?

The P0628 code is considered urgent as it can lead to severe damage to the vehicle or compromise the safety of the driver and passengers. Immediate attention is recommended to avoid further complications.

How to Diagnose the P0628 Code

To diagnose the P0628 code, a mechanic will typically follow these steps:

  • Use an OBD-II scanner to confirm the P0628 code and check for any additional codes.
  • Inspect the wiring and connectors for any visible damage or corrosion.
  • Test the fuel pump to see if it is functioning properly.
  • Check the PCM for proper operation and signal output.

Common Repairs for the P0628 Code

Common repairs for the P0628 code may include:

  • Replacing the fuel pump
  • Repairing or replacing damaged wiring or connectors
  • Replacing the Powertrain Control Module (PCM) if malfunctioning

How Much Does It Cost to Fix the P0628 Code?

The cost to fix the P0628 code can vary widely depending on the root cause of the issue. Simple wiring repairs may cost around $100-$200, while fuel pump replacement can range from $300 to $800 or more, depending on the vehicle and labor costs.

Can I Fix the P0628 Code Myself?

While some DIY enthusiasts may be able to address wiring issues or replace a fuel pump, it is important to have a good understanding of automotive systems. If you’re unsure, it’s best to consult a professional mechanic to ensure the problem is diagnosed and repaired correctly, saving you time and money in the long run.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;