Need a
Repair Manual?
P0616 OBD2: Starter Relay Circuit Low

P0616 OBD2: Starter Relay Circuit Low

The P0616 code is a diagnostic trouble code (DTC) that indicates a problem with the starter relay circuit in your vehicle. This code is triggered when the engine control module (ECM) detects a low voltage condition in the starter relay circuit, which is crucial for starting the engine.

What Does the P0616 Code Mean?

The P0616 code signifies that there is a fault in the starter relay circuit. The starter relay is responsible for controlling the voltage from the battery to the starter motor when the ignition key is turned to the start position. When the ECM identifies that the starter circuit is not functioning correctly, it sets the P0616 code.

What Causes the P0616 Code?

Several issues can lead to the P0616 code being triggered, including:

  • Powertrain Control Module (PCM) failure
  • Starter motor failure
  • Starter relay failure
  • Wiring issues in the starter circuit

What Are the Symptoms of the P0616 Code?

The primary symptom associated with the P0616 code is that the engine may not start. Other symptoms may include:

  • No crank condition
  • Intermittent starting issues

How Serious Is the P0616 Code?

The P0616 code is categorized as urgent. It indicates that immediate action is necessary, as ignoring this code can lead to more severe damage to your vehicle or pose safety risks to the driver and passengers.

How to Diagnose the P0616 Code

To diagnose the P0616 code, a mechanic will typically follow these steps:

  1. Use an OBD-II scanner to confirm the P0616 code and check for any additional codes.
  2. Inspect the starter relay and associated wiring for signs of damage or corrosion.
  3. Test the starter motor and relay for proper operation.
  4. Check the PCM for any faults or failures.

Common Repairs for the P0616 Code

Repairs for the P0616 code may include:

  • Replacing the starter relay
  • Repairing or replacing damaged wiring
  • Replacing the starter motor
  • Reprogramming or replacing the PCM if it is found to be faulty

How Much Does It Cost to Fix the P0616 Code?

The cost to fix the P0616 code can vary widely depending on the underlying issue. On average, you can expect to pay between $100 and $500 for repairs, including parts and labor. Simple fixes like replacing a relay may be on the lower end, while a PCM replacement can be more expensive.

Can I Fix the P0616 Code Myself?

While some DIY enthusiasts may be able to address issues related to the P0616 code, such as replacing a starter relay or repairing wiring, it is essential to have a solid understanding of automotive electrical systems. If you are unsure, it is recommended to seek professional assistance to ensure the problem is diagnosed and repaired correctly.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;