Need a
Repair Manual?
P0558 OBD2: Brake Booster Pressure Sensor Circuit High

P0558 OBD2: Brake Booster Pressure Sensor Circuit High

The P0558 code is an OBD-II trouble code that indicates a high signal from the Brake Booster Pressure Sensor circuit. This code is related to the brake system and is crucial for ensuring proper braking performance in vehicles.

What Does the P0558 Code Mean?

The P0558 code signifies that the Brake Booster Pressure Sensor is sending a signal to the Powertrain Control Module (PCM) that is considered too high, indicating a potential malfunction in the brake booster system.

What Causes the P0558 Code?

  • Brake booster pressure sensor failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues within the brake booster system

What Are the Symptoms of the P0558 Code?

Common symptoms associated with the P0558 code include:

  • Illuminated check engine light
  • Increased brake pedal effort
  • Brake fluid leakage
  • Unresponsive brakes or difficulty in braking

How Serious Is the P0558 Code?

The P0558 code is considered moderate in severity. While it may not pose an immediate threat to vehicle safety, it is essential to address the issue promptly to avoid further complications and ensure optimal vehicle performance.

How to Diagnose the P0558 Code

Diagnosing the P0558 code typically involves the following steps:

  1. Scan the vehicle’s computer for trouble codes using an OBD-II scanner.
  2. Inspect the brake booster pressure sensor and associated wiring for damage or disconnection.
  3. Check for vacuum leaks in the brake booster system.
  4. Test the brake booster pressure sensor for proper voltage and response.
  5. Evaluate the Powertrain Control Module (PCM) for any faults.

Common Repairs for the P0558 Code

Repairs for the P0558 code may include:

  • Replacing the brake booster pressure sensor
  • Repairing or replacing damaged wiring or connectors
  • Replacing the Powertrain Control Module (PCM) if found faulty
  • Fixing any vacuum leaks in the brake booster system

How Much Does It Cost to Fix the P0558 Code?

The cost of repairing the P0558 code can vary widely based on the specific issue and labor rates in your area. Typical costs may range from $100 to $500, depending on whether it’s a simple wiring fix or a sensor replacement.

Can I Fix the P0558 Code Myself?

While some DIY-savvy individuals may be able to address minor wiring issues or replace the brake booster pressure sensor themselves, it is recommended to seek professional assistance for accurate diagnosis and repair, especially if you are unfamiliar with brake system components.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;