Need a
Repair Manual?
P041C OBD2: Exhaust Gas Recirculation Temperature Sensor "B" Circuit Low

P041C OBD2: Exhaust Gas Recirculation Temperature Sensor “B” Circuit Low

What Does the P041C Code Mean?

The P041C code is an OBD-II trouble code that indicates a problem with the Exhaust Gas Recirculation (EGR) Temperature Sensor “B” Circuit. Specifically, it signifies that the signal from the EGR temperature sensor is reading low, which can disrupt the engine’s performance and emissions control strategies.

What Causes the P041C Code?

This code can be triggered by several factors, including:

  • EGR temperature sensor failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues related to the EGR temperature sensor

What Are the Symptoms of the P041C Code?

Common symptoms associated with the P041C code may include:

  • Illuminated check engine light
  • Decreased engine performance
  • Increased emissions
  • Potential rough idling or stalling

How Serious Is the P041C Code?

The P041C code is classified as a moderate severity issue. While it may not pose an immediate threat to the vehicle’s safety or functionality, it is crucial to address the underlying problem within a reasonable time frame to avoid further damage to the engine and maintain optimal performance.

How to Diagnose the P041C Code

To properly diagnose the P041C code, a mechanic should:

  • Use an OBD-II scanner to confirm the presence of the P041C code and check for any related codes.
  • Inspect the EGR temperature sensor and its wiring for any visible damage or disconnections.
  • Test the EGR temperature sensor with a multimeter to ensure it is functioning correctly.
  • Check the Powertrain Control Module (PCM) for any faults if the sensor appears to be in good condition.

Common Repairs for the P041C Code

Repairs for the P041C code may include:

  • Replacing the faulty EGR temperature sensor
  • Repairing or replacing damaged wiring or connectors
  • Replacing or reprogramming the PCM if it is found to be defective

How Much Does It Cost to Fix the P041C Code?

The cost to fix the P041C code can vary widely depending on the underlying issue. Typically, you can expect to pay anywhere from $100 to $300 for sensor replacement, while wiring repairs may cost less. If the PCM needs to be replaced, costs can rise significantly, often exceeding $1,000 including labor.

Can I Fix the P041C Code Myself?

If you have experience with automotive repairs and access to the necessary tools, you may be able to diagnose and fix the P041C code yourself. However, due to the complexities involved with the EGR system and PCM, it is often recommended to seek professional assistance to ensure a proper diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;