Need a
Repair Manual?
P0348 OBD2: Camshaft Position Sensor "A" Circuit High

P0348 OBD2: Camshaft Position Sensor “A” Circuit High

What Does the P0348 Code Mean?

OBD-II Code P0348 is defined as a Camshaft Position Sensor “A” Circuit High. This code indicates that the engine control module (PCM) has detected a high voltage signal from the camshaft position sensor which is outside the expected range.

What Causes the P0348 Code?

  • Broken tone ring
  • Camshaft Position Sensor (CMP) failure
  • Powertrain Control Module (PCM) failure
  • Wiring issue

What Are the Symptoms of the P0348 Code?

  • Decreased engine performance
  • Engine may not start
  • Increased fuel consumption

How Serious Is the P0348 Code?

The P0348 code is considered urgent. Immediate action is necessary as it indicates significant malfunctions that can lead to severe damage to the vehicle or risk the safety of the driver and passengers.

How to Diagnose the P0348 Code

Diagnosing the P0348 code involves a thorough diagnostic routine. Here are steps you can take:

  • Use an OBD-II scanner to confirm the P0348 code and check for any other related codes.
  • Inspect the camshaft position sensor and its wiring for damage or disconnection.
  • Test the sensor’s output voltage to ensure it is within the manufacturer’s specifications.
  • Check the tone ring for any cracks or misalignment.
  • If necessary, test the Powertrain Control Module (PCM) for faults.

Common Repairs for the P0348 Code

  • Camshaft Position Sensor Replacement
  • Repair or replacement of damaged wiring
  • Replacing the tone ring
  • PCM replacement if faulty

How Much Does It Cost to Fix the P0348 Code?

Repair costs for the P0348 code can vary depending on the specific issue and labor rates. On average, replacing the camshaft position sensor can cost between $150 and $400, including parts and labor. Additional costs may arise if wiring or PCM replacement is necessary.

Can I Fix the P0348 Code Myself?

While some DIY enthusiasts may be able to replace the camshaft position sensor themselves, proper diagnosis is crucial to ensure that the root cause of the issue is addressed. If you’re not confident in your ability to diagnose or repair the problem, it’s advisable to seek professional assistance to avoid unnecessary repairs.

About JC Landry

JC spent 15+ years as a certified Master Mechanic before trading the shop for the keyboard. He's worked across dealerships, owned and operated his own independent garage, and consulted on automotive trade school curricula, reviewing technical textbooks used in vocational programs. He now serves as Editor-in-Chief at eManualOnline.com, where he oversees the platform's technical content. He's one of the few voices in automotive publishing who has actually turned wrenches professionally on the vehicles he covers. He didn't learn automotive repair to write about it. He learned to write after spending over a decade doing it.

Leave a Reply

Your email address will not be published. Required fields are marked *

;