Need a
Repair Manual?
P0238 OBD2: Turbocharger/Supercharger Boost Sensor "A" Circuit High

P0238 OBD2: Turbocharger/Supercharger Boost Sensor “A” Circuit High

What Does the P0238 Code Mean?

OBD-II Code P0238 is defined as a Turbocharger/Supercharger Boost Sensor “A” Circuit High. This code indicates that the engine control module (PCM) has detected an incorrect signal from the Boost Pressure Sensor, which measures the amount of boost being produced by the turbocharger or supercharger.

What Causes the P0238 Code?

The P0238 code can be triggered by several factors, including:

  • Brake booster pressure sensor failure
  • Exhaust leak
  • Powertrain Control Module (PCM) failure
  • Turbo/supercharger failure
  • Wiring issues related to the Boost Pressure Sensor

What Are the Symptoms of the P0238 Code?

Drivers may notice a variety of symptoms when the P0238 code is present, such as:

  • Decreased engine performance
  • Increased fuel consumption
  • Lack of boost from the turbo or supercharger

How Serious Is the P0238 Code?

The P0238 code is considered urgent, as it indicates significant malfunctions that could lead to severe damage to the vehicle or pose safety risks to the driver and passengers. Immediate attention and diagnosis are recommended to avoid further complications.

How to Diagnose the P0238 Code

To accurately diagnose the P0238 code, a mechanic should:

  • Use an OBD-II scanner to confirm the presence of the P0238 code and check for any related codes.
  • Inspect the wiring and connectors related to the Boost Pressure Sensor for damage or corrosion.
  • Test the Boost Pressure Sensor to ensure it is functioning correctly.
  • Check for exhaust leaks that may affect boost pressure readings.
  • Evaluate the PCM for faults.

Common Repairs for the P0238 Code

Common repairs to fix the P0238 code may include:

  • Replacing a faulty Boost Pressure Sensor
  • Repairing or replacing damaged wiring or connectors
  • Fixing exhaust leaks
  • Replacing the PCM if it is determined to be defective
  • Addressing any turbo/supercharger issues

How Much Does It Cost to Fix the P0238 Code?

The cost to repair the P0238 code can vary widely based on the specific issue and labor costs in your area. Typical repairs may range from $100 to $1,500, depending on whether a sensor replacement, wiring repair, or PCM replacement is necessary.

Can I Fix the P0238 Code Myself?

While some experienced DIYers may attempt to fix the P0238 code themselves, it is crucial to understand the full diagnostic process and the underlying issues. Proper diagnosis can save time and money on unnecessary repairs, so if you are not confident in your abilities, seeking professional assistance is recommended.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;