Need a
Repair Manual?
P07BA OBD2: Transmission Park Position Sensor/Switch "B" Circuit High

P07BA OBD2: Transmission Park Position Sensor/Switch “B” Circuit High

The P07BA code is an OBD-II trouble code that indicates an issue with the Transmission Park Position Sensor or Switch “B.” This code is crucial for the proper functioning of your vehicle’s transmission system.

What Does the P07BA Code Mean?

The P07BA code signifies that the Transmission Park Position Sensor is reporting a high voltage signal to the Powertrain Control Module (PCM). This sensor is responsible for informing the PCM whether the vehicle is in the park position. If the PCM receives an incorrect signal from this sensor, it will trigger the P07BA code.

What Causes the P07BA Code?

Several factors can lead to the activation of the P07BA code, including:

  • Failure of the Transmission Park Position Sensor
  • Issues with the wiring or connectors associated with the sensor
  • Malfunction of the Powertrain Control Module (PCM)

What Are the Symptoms of the P07BA Code?

When the P07BA code is present, you may experience the following symptoms:

  • The transmission may not shift out of park
  • Difficulty in starting the vehicle
  • Unusual shifting behavior

How Serious Is the P07BA Code?

The P07BA code is categorized as urgent. Immediate action is necessary to address this issue, as it can lead to severe damage to the vehicle’s transmission system or create safety hazards for the driver and passengers.

How to Diagnose the P07BA Code

To properly diagnose the P07BA code, a mechanic would typically follow these steps:

  1. Use an OBD-II scanner to confirm the presence of the P07BA code.
  2. Inspect the Transmission Park Position Sensor and its wiring for any signs of damage or corrosion.
  3. Test the resistance and voltage of the sensor to ensure it is functioning correctly.
  4. Check the PCM for any additional fault codes that may indicate related issues.

Common Repairs for the P07BA Code

Common repairs to resolve the P07BA code may include:

  • Replacing the Transmission Park Position Sensor
  • Repairing or replacing damaged wiring or connectors
  • Reprogramming or replacing the PCM if it is found to be defective

How Much Does It Cost to Fix the P07BA Code?

The cost to fix the P07BA code can vary depending on the specific issue. Typically, repairs may range from $100 to $500. Replacing the sensor is usually the least expensive option, while PCM replacement may be more costly.

Can I Fix the P07BA Code Myself?

While some vehicle owners may be able to replace the Transmission Park Position Sensor themselves, it is important to understand that diagnosing and resolving underlying issues can be complex. If you are not experienced in automotive repairs, it is recommended to seek professional help to avoid further complications.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;