Need a
Repair Manual?
P3480 OBD2: Cylinder 10 Exhaust Valve Control Circuit High

P3480 OBD2: Cylinder 10 Exhaust Valve Control Circuit High

The OBD-II code P3480 indicates a malfunction in the exhaust valve control circuit for cylinder number ten. This code is part of the onboard diagnostics system that monitors various components of the vehicle’s engine and emissions system.

What Does the P3480 Code Mean?

The P3480 code signifies that the engine’s control module (PCM) has detected an issue with the exhaust valve control circuit for cylinder 10. This is typically related to the cylinder deactivation system that many modern vehicles use to enhance fuel efficiency and meet emissions standards.

What Causes the P3480 Code?

Several factors can trigger the P3480 code, including:

  • Low engine oil level
  • Failure of the Powertrain Control Module (PCM)
  • Malfunction of the variable valve timing solenoid
  • Wiring issues or damaged connectors

What Are the Symptoms of the P3480 Code?

When the P3480 code is present, drivers may notice:

  • Decreased engine performance
  • Increased fuel consumption

How Serious Is the P3480 Code?

The P3480 code is considered urgent because it can lead to significant engine performance issues and potentially cause severe damage if not addressed promptly. Immediate action is advised to prevent further complications.

How to Diagnose the P3480 Code

To accurately diagnose the P3480 code, a mechanic will typically:

  • Use an OBD-II scanner to confirm the code and check for any related codes.
  • Inspect engine oil levels and condition.
  • Examine the wiring and connectors associated with cylinder 10’s exhaust valve control circuit.
  • Test the variable valve timing solenoid and the PCM for proper operation.

Common Repairs for the P3480 Code

Repairs for the P3480 code may include:

  • Refilling or changing the engine oil if it is low or contaminated.
  • Replacing a faulty variable valve timing solenoid.
  • Repairing or replacing damaged wiring or connectors.
  • In some cases, replacing the Powertrain Control Module (PCM) may be necessary.

How Much Does It Cost to Fix the P3480 Code?

The cost of repairs for the P3480 code can vary widely based on the specific issue causing the malfunction. On average, you can expect to pay between $100 and $1,500 depending on whether it is a simple wiring fix or a more complex replacement of the PCM.

Can I Fix the P3480 Code Myself?

While some aspects of diagnosing and fixing the P3480 code can be done by a knowledgeable DIYer, it is crucial to understand the entire system involved. If you’re not familiar with engine diagnostics and repairs, it is advisable to consult a professional mechanic. Proper diagnosis will save you time and money on unnecessary repairs.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;