Need a
Repair Manual?
P3418 OBD2: Cylinder 3 Deactivation/Intake Valve Control Circuit Performance

P3418 OBD2: Cylinder 3 Deactivation/Intake Valve Control Circuit Performance

The P3418 OBD-II code indicates an issue with the cylinder deactivation system, specifically the performance of the intake valve control circuit for cylinder number three. This fault code is part of the vehicle’s diagnostic system that monitors engine performance and emissions.

What Does the P3418 Code Mean?

The P3418 code is set when the engine’s control module (PCM) detects that the intake valve for cylinder three is not functioning as commanded. This can lead to decreased engine performance and increased emissions, as the engine may not be operating at its optimal efficiency.

What Causes the P3418 Code?

Several factors can trigger the P3418 code, including:

  • Low engine oil level
  • Powertrain Control Module (PCM) failure
  • Variable valve timing solenoid failure
  • Wiring issues within the control circuit

What Are the Symptoms of the P3418 Code?

Drivers may experience various symptoms when the P3418 code is present, including:

  • Decreased engine performance
  • Increased fuel consumption

How Serious Is the P3418 Code?

The P3418 code is classified as urgent. It indicates a significant malfunction that can lead to severe damage to the vehicle if not addressed promptly. Ignoring this code may jeopardize engine performance and safety.

How to Diagnose the P3418 Code

Diagnosing the P3418 code involves several steps:

  1. Use an OBD-II scanner to confirm the presence of the P3418 code.
  2. Inspect the engine oil level and condition.
  3. Check the variable valve timing solenoid for proper operation.
  4. Examine wiring and connections for any damage or corrosion.
  5. Test the Powertrain Control Module (PCM) functionality.

Common Repairs for the P3418 Code

Repairs for the P3418 code may include:

  • Refilling or changing engine oil
  • Replacing the variable valve timing solenoid
  • Repairing or replacing damaged wiring or connectors
  • Replacing the PCM if deemed necessary

How Much Does It Cost to Fix the P3418 Code?

The cost to fix the P3418 code can vary widely based on the underlying issue. Simple repairs, like an oil change, may cost $50 to $100, while replacing the variable valve timing solenoid or PCM can range from $200 to $1,000 or more, depending on labor and parts costs.

Can I Fix the P3418 Code Myself?

While some aspects of diagnosing and fixing the P3418 code can be done by a knowledgeable DIYer, such as checking the oil level or inspecting wiring, more complex issues may require professional diagnostic tools and expertise. If you are not experienced with automotive repairs, it is advisable to seek professional help to avoid further damage to the vehicle.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;