Need a
Repair Manual?
P3412 OBD2: Cylinder 2 Deactivation/Intake Valve Control Circuit High

P3412 OBD2: Cylinder 2 Deactivation/Intake Valve Control Circuit High

The P3412 OBD-II code indicates a problem with the cylinder deactivation system, specifically related to the intake valve control circuit for cylinder number two. This code is triggered by the engine’s control module (PCM) when it detects that the intake valve is not functioning as commanded.

What Does the P3412 Code Mean?

The P3412 code signifies that there is an issue with the cylinder deactivation system affecting cylinder two. This system is designed to improve fuel efficiency and reduce emissions by allowing certain cylinders to be deactivated during low-load conditions. If the PCM identifies that the intake valve for cylinder two is not operating correctly, it will set this code.

What Causes the P3412 Code?

  • Low engine oil level
  • Powertrain Control Module (PCM) failure
  • Variable valve timing solenoid failure
  • Wiring issues related to the intake valve control circuit

What Are the Symptoms of the P3412 Code?

  • Decreased engine performance
  • Increased fuel consumption
  • Rough idling
  • Potential engine stalling

How Serious Is the P3412 Code?

The P3412 code is classified as urgent and should be addressed promptly. Ignoring this code can lead to significant engine damage and may impact safety while driving. It is crucial to diagnose and repair the underlying issues to prevent further complications.

How to Diagnose the P3412 Code

  1. Use an OBD-II scanner to confirm the P3412 code and check for any additional codes.
  2. Inspect the engine oil level and condition.
  3. Check the variable valve timing solenoid for proper operation.
  4. Examine the wiring and connections related to the intake valve control circuit for any signs of damage or corrosion.
  5. Test the Powertrain Control Module (PCM) to ensure it is functioning correctly.

Common Repairs for the P3412 Code

  • Refilling or changing the engine oil
  • Replacing the variable valve timing solenoid
  • Repairing or replacing damaged wiring or connectors
  • Reprogramming or replacing the PCM if necessary

How Much Does It Cost to Fix the P3412 Code?

The cost to fix the P3412 code can vary widely depending on the underlying issue. Simple repairs, such as changing engine oil, may cost between $30 and $100. More complex repairs, like replacing the variable valve timing solenoid or PCM, can range from $200 to $1,000 or more, depending on labor and parts.

Can I Fix the P3412 Code Myself?

If you have experience with automotive repairs and diagnostics, you may be able to address some issues related to the P3412 code yourself, particularly checking oil levels and inspecting wiring. However, for more complicated diagnostics and repairs, it is recommended to seek professional assistance to ensure proper resolution of the issue.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;