Need a
Repair Manual?
P2788 OBD2: Auto Shift Manual Adaptive Learning at Limit

P2788 OBD2: Auto Shift Manual Adaptive Learning at Limit

The P2788 OBD-II trouble code indicates an issue with the transmission control system, specifically relating to the adaptive learning function of the transmission. This code is categorized as urgent, meaning immediate attention is required to prevent further damage to the vehicle.

What Does the P2788 Code Mean?

The P2788 code signifies that the Transmission Control Module (TCM) has reached its limits in adapting to the driver’s shifting pattern. Essentially, the TCM learns how the driver operates the vehicle to optimize the performance of the transmission. When it cannot adapt properly, it stores this code.

What Causes the P2788 Code?

Several factors can trigger the P2788 code, including:

  • Internal transmission failure
  • Transmission Control Module (TCM) failure
  • Low transmission fluid level

What Are the Symptoms of the P2788 Code?

Drivers may notice the following symptoms when the P2788 code is present:

  • Increased fuel consumption
  • Transmission may not shift properly

How Serious Is the P2788 Code?

The P2788 code is categorized as urgent. This means that if left unaddressed, it can lead to significant damage to the transmission, potentially causing unsafe driving conditions for the vehicle’s occupants. Immediate diagnosis and repair are recommended.

How to Diagnose the P2788 Code

To diagnose the P2788 code, a mechanic will typically:

  • Use an OBD-II scanner to confirm the code and check for any additional codes
  • Inspect the transmission fluid level and condition
  • Examine the TCM for faults or failures
  • Test the transmission to see if it adapts correctly under various driving conditions

Common Repairs for the P2788 Code

Repairs for the P2788 code may include:

  • Replacing or reprogramming the Transmission Control Module (TCM)
  • Repairing or replacing internal transmission components
  • Refilling or flushing the transmission fluid

How Much Does It Cost to Fix the P2788 Code?

The cost to repair the P2788 code can vary widely based on the specific issue. Basic repairs, like fluid changes, may start around $100, while more complex repairs, such as TCM replacements, can range from $500 to over $2,000, depending on the vehicle make and model.

Can I Fix the P2788 Code Myself?

While some basic maintenance tasks can be handled by DIY enthusiasts, the P2788 code often requires specialized diagnostic equipment and knowledge of transmission systems. If you’re not experienced with automotive repairs, it’s advisable to consult a professional mechanic to ensure proper diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;