Need a
Repair Manual?
P2605 OBD2: Intake Air Heater "B" Circuit/Open

P2605 OBD2: Intake Air Heater “B” Circuit/Open

The P2605 code is an OBD-II diagnostic trouble code related to the vehicle’s intake air heater system. This code is triggered when the engine control module (PCM) detects a problem with the intake air heater circuit, which is crucial for warming the air entering the engine during cold starts.

What Does the P2605 Code Mean?

Specifically, the P2605 code indicates that there is an open circuit or failure in the Intake Air Heater “B” circuit. The intake air heater is designed to heat the air entering the engine to improve combustion during cold weather conditions.

What Causes the P2605 Code?

Several factors can lead to the P2605 code being set, including:

  • Failure of the intake air heater
  • Powertrain Control Module (PCM) failure
  • Wiring issues or damaged connectors in the intake air heater circuit

What Are the Symptoms of the P2605 Code?

Drivers may experience a few symptoms when this code is triggered, such as:

  • Check Engine Light illuminated
  • Difficulty starting the engine in cold weather
  • Reduced engine performance or efficiency

How Serious Is the P2605 Code?

The severity of the P2605 code is considered moderate. While it may not pose an immediate threat to vehicle safety or functionality, it is advisable to have it diagnosed and repaired promptly to prevent further complications.

How to Diagnose the P2605 Code

To accurately diagnose the P2605 code, a mechanic will typically follow these steps:

  • Use an OBD-II scanner to confirm the P2605 code and check for any related codes.
  • Inspect the wiring and connectors associated with the intake air heater for damage or corrosion.
  • Test the intake air heater with a multimeter to ensure it is functioning correctly.
  • Check the PCM for any faults or failures.

Common Repairs for the P2605 Code

Common repairs that may be needed to resolve the P2605 code include:

  • Replacing the intake air heater
  • Repairing or replacing damaged wiring and connectors
  • Replacing the PCM if it is found to be faulty

How Much Does It Cost to Fix the P2605 Code?

The cost to repair the P2605 code can vary significantly based on the underlying issue. On average, repairs may range from $100 to $600, depending on whether wiring repairs, intake air heater replacement, or PCM replacement is required.

Can I Fix the P2605 Code Myself?

While some DIY enthusiasts may be able to diagnose and repair minor wiring issues or replace the intake air heater, it is often recommended to consult with a professional mechanic for accurate diagnosis and repair, especially when dealing with the PCM.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;