Need a
Repair Manual?
P255D OBD2: PTO Speed Selector Sensor/Switch 2 Circuit High

P255D OBD2: PTO Speed Selector Sensor/Switch 2 Circuit High

The P255D OBD-II code relates to the PTO (Power Take-Off) Speed Selector Sensor/Switch 2 Circuit High. This code is triggered when the vehicle’s onboard diagnostic system detects that the signal from the PTO speed selector switch is implausible, leading to the deactivation of the PTO system.

What Does the P255D Code Mean?

The P255D code indicates a malfunction in the PTO speed selector sensor or switch, specifically when the circuit is reading a high signal that is not expected. This may affect the operation of auxiliary equipment attached to the vehicle, such as hydraulic dump beds or plows, which rely on the PTO for functionality.

What Causes the P255D Code?

Several factors can trigger the P255D code, including:

  • Failure of the PTO speed selector switch
  • Wiring issues, such as shorts or open circuits
  • Powertrain Control Module (PCM) failure

What Are the Symptoms of the P255D Code?

The primary symptom associated with the P255D code is:

  • PTO system disabled

As the PTO system is crucial for operating auxiliary equipment, its failure can severely limit the vehicle’s capabilities.

How Serious Is the P255D Code?

The P255D code is classified as a moderate severity code. While it may not pose an immediate threat to the vehicle’s safety or functionality, it is important to address the issue in a timely manner to ensure continued operation of auxiliary systems.

How to Diagnose the P255D Code

To properly diagnose the P255D code, follow these steps:

  1. Use an OBD-II scanner to verify the code.
  2. Inspect the PTO speed selector switch and wiring for visible damage or corrosion.
  3. Test the PTO speed selector switch using a multimeter to ensure it is functioning correctly.
  4. Check the Powertrain Control Module (PCM) for any additional fault codes that may provide more insight.

Common Repairs for the P255D Code

Common repairs for the P255D code may include:

  • Replacing the PTO speed selector switch
  • Repairing or replacing damaged wiring
  • Replacing the Powertrain Control Module (PCM) if found to be faulty

How Much Does It Cost to Fix the P255D Code?

The cost to fix the P255D code can vary significantly based on the underlying cause and labor rates in your area. Generally, repairs can range from $100 to $1,000, depending on whether you need to replace a simple switch or the PCM itself.

Can I Fix the P255D Code Myself?

While some individuals with automotive knowledge may be able to diagnose and repair the P255D code themselves, it is recommended to seek professional assistance. Proper diagnostic tools and expertise are essential for accurately diagnosing and resolving the issue without causing further problems.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;