Need a
Repair Manual?
P2437 OBD2: Secondary Air Injection System Air Flow/Pressure Sensor Circuit

P2437 OBD2: Secondary Air Injection System Air Flow/Pressure Sensor Circuit

The P2437 OBD-II code refers to a fault in the Secondary Air Injection System Air Flow/Pressure Sensor Circuit. This system is crucial for reducing emissions during the cold start phase of the engine.

What Does the P2437 Code Mean?

The P2437 code indicates that the engine’s Powertrain Control Module (PCM) has detected an issue with the Secondary Air Injection System’s pressure sensor. This sensor monitors the flow of air injected into the exhaust system, which helps in burning rich exhaust emissions during engine warm-up.

What Causes the P2437 Code?

Several factors can trigger the P2437 code, including:

  • Air control solenoid failure
  • Powertrain Control Module (PCM) failure
  • Secondary Air System pressure sensor failure
  • Wiring issues related to the air injection system

What Are the Symptoms of the P2437 Code?

The symptoms associated with the P2437 code may include:

  • Illuminated Check Engine Light
  • Reduced engine performance
  • Increased emissions

How Serious Is the P2437 Code?

The P2437 code is considered to have moderate severity. While it may not pose an immediate threat to the vehicle’s safety or functionality, it is advisable to have it diagnosed and repaired in a timely manner to prevent further issues and maintain optimal vehicle performance.

How to Diagnose the P2437 Code

To diagnose the P2437 code, a mechanic will typically:

  • Use an OBD-II scanner to confirm the presence of the code.
  • Inspect the wiring and connectors associated with the Secondary Air Injection System.
  • Test the air control solenoid and the pressure sensor for proper functionality.
  • Check for any other related trouble codes.

Common Repairs for the P2437 Code

Common repairs that may be needed to fix the P2437 code include:

  • Replacing the air pump
  • Repairing or replacing damaged wiring or connectors
  • Replacing the air control solenoid
  • Replacing a faulty PCM if necessary

How Much Does It Cost to Fix the P2437 Code?

The cost to fix the P2437 code can vary widely depending on the specific issue and the labor rates in your area. On average, you might expect to pay between $100 and $500 for repairs, including parts and labor.

Can I Fix the P2437 Code Myself?

If you have experience with automotive repair and the right tools, you may be able to diagnose and repair the P2437 code yourself, particularly if it involves replacing the air pump or checking wiring connections. However, for those less experienced, it is advisable to consult a professional mechanic to ensure proper diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;