Need a
Repair Manual?
P2319 OBD2: Ignition Coil "G" Primary Control Circuit High

P2319 OBD2: Ignition Coil “G” Primary Control Circuit High

The OBD-II code P2319 indicates a problem with the ignition coil “G” primary control circuit. This code is a signal that there is an issue with the ignition system that requires immediate attention.

What Does the P2319 Code Mean?

The P2319 code signifies that the engine control module (PCM) has detected a high voltage condition in the primary control circuit of ignition coil “G”. This is a critical component in the ignition system, responsible for igniting the air/fuel mixture within the engine’s combustion chambers.

What Causes the P2319 Code?

Several factors can contribute to the P2319 code, including:

  • Ignition coil failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues, such as damaged or corroded wires

What Are the Symptoms of the P2319 Code?

When the P2319 code is triggered, you may experience the following symptoms:

  • Decreased engine performance
  • Increased fuel consumption
  • Engine stumbling or misfiring

How Serious Is the P2319 Code?

The P2319 code is classified as urgent, meaning it requires immediate action. Ignoring this code can lead to severe engine damage and may pose safety risks to the driver and passengers.

How to Diagnose the P2319 Code

To properly diagnose the P2319 code, follow these steps:

  1. Use an OBD-II scanner to confirm the presence of the P2319 code.
  2. Inspect the ignition coil and its wiring for any visible damage or corrosion.
  3. Test the ignition coil using a multimeter to check for proper resistance.
  4. Examine the PCM and its connectors for any faults.
  5. Clear the code and perform a test drive to see if the code returns.

Common Repairs for the P2319 Code

Common repairs that may be necessary to resolve the P2319 code include:

  • Replacing the faulty ignition coil
  • Repairing or replacing damaged wiring
  • Reprogramming or replacing the PCM if it is found to be faulty

How Much Does It Cost to Fix the P2319 Code?

The cost to fix the P2319 code can vary significantly depending on the underlying cause. On average, you can expect to pay between $150 and $600 for repairs, including parts and labor.

Can I Fix the P2319 Code Myself?

While some vehicle owners may be able to diagnose and replace an ignition coil themselves, it is important to have a good understanding of automotive systems. If you are not experienced, it is recommended to seek professional assistance to avoid further damage or safety issues.

About JC Landry

JC spent 15+ years as a certified Master Mechanic before trading the shop for the keyboard. He's worked across dealerships, owned and operated his own independent garage, and consulted on automotive trade school curricula, reviewing technical textbooks used in vocational programs. He now serves as Editor-in-Chief at eManualOnline.com, where he oversees the platform's technical content. He's one of the few voices in automotive publishing who has actually turned wrenches professionally on the vehicles he covers. He didn't learn automotive repair to write about it. He learned to write after spending over a decade doing it.

Leave a Reply

Your email address will not be published. Required fields are marked *

;