Need a
Repair Manual?
P2242 OBD2: O2 Sensor Positive Current Control Circuit High

P2242 OBD2: O2 Sensor Positive Current Control Circuit High

The P2242 code is part of the On-Board Diagnostics II (OBD-II) system and indicates a problem with the oxygen sensor’s positive current control circuit. This code typically points to issues affecting the performance of the vehicle and the efficiency of the engine.

What Does the P2242 Code Mean?

The P2242 code signifies that the Powertrain Control Module (PCM) has detected a high voltage in the positive current control circuit of the oxygen sensor. This can affect the sensor’s ability to accurately measure the oxygen content in the exhaust gases, which is critical for maintaining proper fuel economy and emissions levels.

What Causes the P2242 Code?

Several factors can trigger the P2242 code, including:

  • Exhaust leaks that affect sensor readings
  • Oxygen sensor failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues or poor electrical connections

What Are the Symptoms of the P2242 Code?

Drivers may notice the following symptoms when the P2242 code is present:

  • Decreased engine performance
  • Increased fuel consumption

How Serious Is the P2242 Code?

The severity of the P2242 code is moderate. While it may not pose an immediate threat to the vehicle’s safety or functionality, it is advisable to have it diagnosed promptly to prevent more serious issues from developing, such as reduced engine efficiency or increased emissions.

How to Diagnose the P2242 Code

To accurately diagnose the P2242 code, a mechanic should follow these steps:

  • Use an OBD-II scanner to confirm the P2242 code and check for additional codes.
  • Inspect the oxygen sensor and its wiring for damage or corrosion.
  • Check for any exhaust leaks that may affect sensor performance.
  • Test the oxygen sensor output and the PCM to ensure both are functioning correctly.

Common Repairs for the P2242 Code

Repairs for the P2242 code may include:

  • Replacing the oxygen sensor
  • Repairing or replacing damaged wiring or connectors
  • Fixing any exhaust leaks
  • Replacing the Powertrain Control Module (if found to be faulty)

How Much Does It Cost to Fix the P2242 Code?

The cost to repair the P2242 code can vary widely based on the specific issue and the make and model of the vehicle. On average, repairs may range from $100 to $300, depending on whether the oxygen sensor needs replacement or if there are wiring issues to address.

Can I Fix the P2242 Code Myself?

If you have experience with automotive repairs and access to the necessary tools, you may be able to address the P2242 code yourself, particularly if it involves replacing the oxygen sensor or fixing wiring issues. However, for more complex diagnoses or repairs, it is advisable to consult a professional mechanic.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;