Need a
Repair Manual?
P2223 OBD2: NOx Sensor Heater Sense Circuit Low

P2223 OBD2: NOx Sensor Heater Sense Circuit Low

What Does the P2223 Code Mean?

The P2223 code signals a low reading from the NOx sensor heater circuit. This typically means that the Powertrain Control Module (PCM) has detected a problem with the electrical circuit that powers the NOx sensor heater, which is essential for optimal sensor operation.

What Causes the P2223 Code?

Several factors can lead to the P2223 code being triggered, including:

  • NOx sensor failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues related to the NOx sensor

What Are the Symptoms of the P2223 Code?

When the P2223 code is present, you may notice the following symptoms:

  • Illuminated check engine light
  • Increased emissions
  • Reduced engine performance

How Serious Is the P2223 Code?

The P2223 code is classified as a moderate severity issue. While it may not pose an immediate threat to your vehicle’s safety or functionality, it is essential to address it promptly to prevent further complications and maintain optimal vehicle performance.

How to Diagnose the P2223 Code

Diagnosing the P2223 code typically involves the following steps:

  1. Use an OBD-II scanner to confirm the code.
  2. Inspect the wiring and connectors associated with the NOx sensor.
  3. Test the NOx sensor functionality.
  4. Check the Powertrain Control Module for any faults.

Common Repairs for the P2223 Code

To resolve the P2223 code, mechanics may perform one or more of the following repairs:

  • Replace the faulty NOx sensor
  • Repair or replace damaged wiring
  • Replace the Powertrain Control Module if defective

How Much Does It Cost to Fix the P2223 Code?

The cost to fix the P2223 code can vary significantly based on the specific issue. Typical repair costs can range from $100 to $800, depending on whether you need to replace the NOx sensor, repair wiring, or replace the PCM.

Can I Fix the P2223 Code Myself?

While some DIY enthusiasts may be able to diagnose and repair simple wiring issues or replace the NOx sensor, it is recommended to consult a professional mechanic for accurate diagnosis and repair to ensure the problem is resolved effectively.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;