Need a
Repair Manual?
P2134 OBD2: Throttle/Pedal Position Sensor/Switch "F" Circuit Intermittent

P2134 OBD2: Throttle/Pedal Position Sensor/Switch “F” Circuit Intermittent

The P2134 code is an OBD-II trouble code that indicates an issue with the Throttle/Pedal Position Sensor or Switch “F” circuit. This diagnostic code is triggered when the engine control module (PCM) detects an intermittent fault in the circuit, which can lead to performance issues.

What Does the P2134 Code Mean?

When the PCM identifies a problem with the Throttle Position Sensor (TPS) or the Accelerator Pedal Position (APP) Sensor, it sets the P2134 code. These sensors are crucial for communicating the driver’s requested speed and throttle position to the PCM. An issue with this circuit can severely affect vehicle performance.

What Causes the P2134 Code?

  • Failure of the Accelerator Pedal Position (APP) assembly
  • Failure of the Powertrain Control Module (PCM)
  • Failure of the Throttle Position Sensor (TPS)
  • Wiring issues in the sensor circuit

What Are the Symptoms of the P2134 Code?

  • Decreased engine performance
  • Engine may enter limp home mode, limiting speed to 20 mph or less

How Serious Is the P2134 Code?

The P2134 code is categorized as urgent. If not addressed promptly, it can lead to significant engine performance issues and may endanger the driver and passengers. The PCM may limit the vehicle’s speed to protect the engine, making it crucial to diagnose and repair the issue quickly.

How to Diagnose the P2134 Code

  1. Use an OBD-II scanner to confirm the P2134 code and check for any other related trouble codes.
  2. Inspect the wiring and connectors related to the throttle and pedal position sensors for any damage or corrosion.
  3. Test the functionality of the Throttle Position Sensor and Accelerator Pedal Position Sensor.
  4. Check the Powertrain Control Module for any faults.

Common Repairs for the P2134 Code

  • Replacing the Throttle Position Sensor (TPS)
  • Replacing the Accelerator Pedal Position (APP) assembly
  • Repairing or replacing damaged wiring or connectors
  • Replacing the Powertrain Control Module (PCM) if necessary

How Much Does It Cost to Fix the P2134 Code?

The cost to repair the P2134 code can vary significantly based on the underlying issue. On average, repairs can range from $100 to $800, depending on whether sensor replacement, wiring repairs, or PCM replacement is needed.

Can I Fix the P2134 Code Myself?

If you have experience working with automotive electronics and diagnostics, you may be able to address the P2134 code yourself. However, since the issue can involve multiple components and potentially complex systems, it is recommended to consult a professional mechanic if you are unsure. Proper diagnosis is essential to avoid unnecessary repairs.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;