Need a
Repair Manual?
P084E OBD2: Transmission Fluid Pressure Sensor/Switch "H" Circuit Intermittent

P084E OBD2: Transmission Fluid Pressure Sensor/Switch “H” Circuit Intermittent

The P084E code indicates an issue with the Transmission Fluid Pressure Sensor or Switch “H” Circuit. This trouble code is part of the OBD-II diagnostic system and is triggered when the engine’s control module (PCM) or Transmission Control Module (TCM) detects an intermittent problem with the transmission fluid pressure.

What Does the P084E Code Mean?

The P084E code signifies that there is a fault in the transmission fluid pressure sensor or switch that monitors the hydraulic pressure in the transmission. This sensor is crucial for ensuring smooth shifting by providing the necessary hydraulic pressure to engage the transmission clutches.

What Causes the P084E Code?

  • Transmission Control Module (TCM) failure
  • Low transmission fluid level
  • Failure of the transmission fluid pressure sensor
  • Wiring issues related to the sensor or switch

What Are the Symptoms of the P084E Code?

  • Transmission may not shift properly
  • Increased fuel consumption
  • Delayed or erratic shifting

How Serious Is the P084E Code?

The P084E code is categorized as urgent, meaning immediate attention is necessary. Failure to address this issue can lead to severe damage to the transmission system, potentially resulting in costly repairs and unsafe driving conditions.

How to Diagnose the P084E Code

To diagnose the P084E code, a mechanic will typically follow these steps:

  1. Use an OBD-II scanner to confirm the presence of the P084E code.
  2. Check the transmission fluid level and condition.
  3. Inspect the wiring and connectors associated with the transmission fluid pressure sensor.
  4. Test the functionality of the transmission fluid pressure sensor.
  5. Evaluate the TCM for any faults.

Common Repairs for the P084E Code

  • Replacing the transmission fluid pressure sensor
  • Repairing or replacing wiring and connectors
  • Refilling or flushing the transmission fluid
  • Replacing the Transmission Control Module (if necessary)

How Much Does It Cost to Fix the P084E Code?

The cost to repair the P084E code can vary significantly based on the underlying cause. Typically, repairs may range from $100 to $1,500, depending on whether you need to replace a sensor, fix wiring issues, or replace the TCM.

Can I Fix the P084E Code Myself?

While some DIY enthusiasts may be able to address minor issues such as checking fluid levels or inspecting wiring, diagnosing and repairing transmission-related issues can be complex. It is generally recommended to seek professional assistance to ensure accurate diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;