Need a
Repair Manual?
P073E OBD2: Unable to Engage Reverse

P073E OBD2: Unable to Engage Reverse

The P073E OBD-II code indicates that the vehicle’s transmission is unable to engage reverse gear. This can lead to significant issues with vehicle operation and should be addressed promptly.

What Does the P073E Code Mean?

The P073E code is triggered when the Transmission Control Module (TCM) detects that the transmission is not holding the requested gear, specifically the reverse gear. This message is communicated to the engine control module (PCM), which sets the code.

What Causes the P073E Code?

Several factors can lead to the P073E code, including:

  • Internal transmission failure
  • Transmission Control Module (TCM) failure
  • Low transmission fluid level
  • Transmission solenoid failure
  • Wiring issues

What Are the Symptoms of the P073E Code?

Symptoms associated with the P073E code often include:

  • Inability to engage reverse gear
  • Transmission may not shift properly
  • Unusual noises from the transmission
  • Warning lights on the dashboard

How Serious Is the P073E Code?

This code is considered urgent, as it indicates a significant malfunction within the transmission that can lead to severe damage if not addressed. Immediate action is necessary to avoid further complications.

How to Diagnose the P073E Code

Diagnosing the P073E code typically involves the following steps:

  1. Using an OBD-II scanner to confirm the P073E code and check for any other related codes.
  2. Inspecting the transmission fluid level and quality.
  3. Checking for any visible wiring issues or damaged connectors.
  4. Testing the transmission solenoids and the TCM for proper operation.
  5. Performing a road test to assess transmission performance.

Common Repairs for the P073E Code

Repairs for the P073E code may include:

  • Changing the automatic transmission fluid and filter
  • Replacing faulty transmission solenoids
  • Repairing or replacing damaged wiring
  • Replacing the Transmission Control Module (TCM)
  • Addressing any internal transmission failures

How Much Does It Cost to Fix the P073E Code?

The cost to fix the P073E code can vary widely based on the specific issue and the make and model of the vehicle. Typical repair costs can range from $150 for a fluid change to over $2,500 for a complete transmission rebuild.

Can I Fix the P073E Code Myself?

While some aspects of diagnosing and repairing the P073E code can be done by a knowledgeable DIY mechanic, it is essential to have a clear understanding of transmission systems. If you are not confident in your skills, it is advisable to seek professional help to avoid causing further damage.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;