Need a
Repair Manual?
P0490 OBD2: Exhaust Gas Recirculation "A" Control Circuit High

P0490 OBD2: Exhaust Gas Recirculation “A” Control Circuit High

The OBD-II code P0490 indicates a problem with the Exhaust Gas Recirculation (EGR) system. This code is triggered when the engine control module (PCM) registers a high control circuit reading for the EGR system. The EGR system is essential for reducing emissions by recirculating a portion of the exhaust gases back into the engine’s intake.

What Does the P0490 Code Mean?

The P0490 code is a generic OBD-II trouble code that signifies an issue with the EGR valve control circuit. Specifically, it indicates that the PCM is detecting a higher than expected voltage or current in the EGR control circuit, which could stem from various sources such as the EGR valve itself, wiring issues, or a faulty PCM.

What Causes the P0490 Code?

Several factors can lead to the P0490 code being set, including:

  • EGR valve failure
  • Powertrain Control Module (PCM) failure
  • Wiring issues related to the EGR circuit

What Are the Symptoms of the P0490 Code?

Drivers may notice several symptoms when the P0490 code is present, including:

  • Check Engine Light illuminated
  • Decreased engine performance
  • Increased emissions
  • Rough idling or stalling

How Serious Is the P0490 Code?

The severity of the P0490 code is considered moderate. While it may not pose an immediate threat to vehicle safety or functionality, it is crucial to address the issue promptly to prevent further damage to the engine or the emissions system.

How to Diagnose the P0490 Code

Diagnosing the P0490 code typically involves the following steps:

  1. Use an OBD-II scanner to confirm the P0490 code and check for any additional codes.
  2. Inspect the EGR valve and its wiring for damage or corrosion.
  3. Test the EGR valve operation to ensure it opens and closes correctly.
  4. Check the PCM for proper functioning and any related faults.

Common Repairs for the P0490 Code

Common repairs for addressing the P0490 code may include:

  • Replacing the EGR valve
  • Repairing or replacing damaged wiring in the EGR circuit
  • Replacing the PCM if it is found to be faulty

How Much Does It Cost to Fix the P0490 Code?

The cost to fix the P0490 code can vary widely depending on the specific issue. On average, repairs may range from $200 to $1,000, depending on whether the EGR valve needs replacement, wiring repairs are necessary, or if the PCM requires replacement.

Can I Fix the P0490 Code Myself?

While some aspects of diagnosing and fixing the P0490 code may be within the capabilities of a DIY mechanic, such as inspecting wiring and replacing the EGR valve, others, like PCM diagnosis and reprogramming, may require professional expertise and specialized tools. Always consider your skill level and the complexity of the repair before attempting to fix it yourself.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;