Need a
Repair Manual?
P0095 OBD2: Intake Air Temperature Sensor 2 Circuit

P0095 OBD2: Intake Air Temperature Sensor 2 Circuit

What Does the P0095 Code Mean?

The P0095 code is a diagnostic trouble code (DTC) that indicates an issue with the Intake Air Temperature Sensor 2 circuit. This code typically appears in diesel engines, where the sensor measures the temperature of the air entering the charge air cooler. If the Powertrain Control Module (PCM) finds the sensor’s readings to be implausible, the P0095 code is triggered.

What Causes the P0095 Code?

Several factors can lead to the P0095 code being set. The most common causes include:

  • Failure of the Intake Air Temperature (IAC) sensor
  • Malfunction of the Powertrain Control Module (PCM)
  • Wiring issues or damaged connectors in the sensor circuit

What Are the Symptoms of the P0095 Code?

When the P0095 code is triggered, you may notice the following symptoms:

  • Decreased engine performance
  • Increased fuel consumption

How Serious Is the P0095 Code?

The P0095 code is classified as a moderate severity issue. While it may not pose an immediate threat to the vehicle’s safety or functionality, it is essential to address the problem promptly. Failing to diagnose and fix the underlying issue could lead to more severe engine problems over time.

How to Diagnose the P0095 Code

To accurately diagnose the P0095 code, a mechanic will typically follow these steps:

  • Use an OBD-II scanner to confirm the presence of the P0095 code.
  • Inspect the Intake Air Temperature Sensor and its wiring for any visible damage or corrosion.
  • Test the IAC sensor’s operation to ensure it is functioning properly.
  • Check the Powertrain Control Module for faults or failures.
  • Perform a thorough system inspection to rule out other potential issues.

Common Repairs for the P0095 Code

Common repairs to resolve the P0095 code may include:

  • Replacing a faulty Intake Air Temperature Sensor
  • Repairing or replacing damaged wiring or connectors
  • Reprogramming or replacing the Powertrain Control Module

How Much Does It Cost to Fix the P0095 Code?

The cost to repair the P0095 code can vary significantly based on the specific issue and the make and model of the vehicle. On average, you may expect to pay between $100 to $500 for repairs, including parts and labor.

Can I Fix the P0095 Code Myself?

If you have a basic understanding of automotive repairs and the proper tools, you may be able to address some of the issues causing the P0095 code yourself. However, for more complex problems, such as PCM failures, it is advisable to seek professional assistance to ensure proper diagnosis and repair.

About JC Landry

JC is the Senior Editor at eManualOnline.com, GarageSpot.com, and Drive-My.com, as well as the Webmaster of TheMechanicDoctor.com, only to name a few. He's been a certified Master Mechanic for 15 years, working for various car dealers and specialized repair shops before turning towards blogging about cars and EVs in the hope of helping the next generation of automotive technicians. He also loves cats, Johnny Cash and Subarus.

Leave a Reply

Your email address will not be published. Required fields are marked *

;