Piper PA-34-220T SENECA III SENECA IV IPC Parts manual

AIRPLANE PARTS CATALOG PA-34-220T SENECA III SENECA IV CARD 1 OF 3 PIPER AIRCRAFT CORPORATION 1A1 REISSUED: NOVEMBER 29, 1993 [PART NUMBER 761 750]

Published by Technical Publications Piper Aircraft Corporation 2926 Piper Drive Vero Beach, Florida 32960 U.S.A. Member of GAMA General Aviation Manufacturers Association Reissued: November 29, 1993 1A2 PIPER AIRCRAFT PA-34-220T AIRPLANE PARTS CATALOG

AEROFICHE EXPLANATION AND REVISION STATUS The Parts Catalog information in this set of Aerofiche cards is arranged in accordance with general specifications of Aerofiche adopted by the General Aviation Manufacturer's Association. Conversion of Aerofiche alpha/numeric code numbers: First number is the Aerofiche card identifier. Letter is the horizontal line reference per card. Second number is the vertical line reference per card. Example: 2J16 = Aerofiche card number two of given set, Grid location J16. REVISIONS The information compiled in this Aerofiche Parts Catalog is kept current by revisions distributed periodically. Each revision is a complete Aerofiche card replacement and supersedes Aerofiche cards of the same number in the set. Revisions to this PA-34-220T Parts Catalog issued December 15, 1980 are as follows: Aerofiche Effectivity Publication Date Card Effectivity ORG 801215 December 15, 1980 1 and 2 PR 810421 April 21, 1981 1 and 2 PR 810909 September 9, 1981 1 and 2 PR 820111 January 11, 1982 1 and 2 PR 820713 July 13, 1982 1 and 2 PR 830214 February 14, 1983 1 and 2 PR 830812 August 12, 1983 1 and 2 PR 840313 March 13, 1984 1 and 2 PR 840808 August 8,1984 1 and 2 Revisions to this PA-34-220T Parts Catalog reissued December 20, 1989 are as follows: Aerofiche Effectivity Publication Date Card Effectivity CR 891220 December 20, 1989 1 and 2 Revisions to this PA-34-220T Parts Catalog reissued November 29, 1993 are as follows: Aerofiche Effectivity Publication Date Card Effectivity CR 931129 November 29, 1993 1, 2, and 3 NOTE: Refer to Aerofiche Customer Service Information Catalog (1753 755) for revision dates and card effectivities for this parts catalog. PIPER AIRCRAFT PA-34-220T AIRPLANE PARTS CATALOG 1A3 Reissued: November 29, 1993

INTRODUCTION This illustrated Parts Catalog provides simple, positive identification of replacement parts for the Piper Model PA-34-220T, manufactured by the Piper Aircraft Corporation of Vero Beach, Florida. NOTE: DO NOT USE THIS CATALOG FOR RIGGING AND INSTALLATION PURPOSES. 1. The catalog is divided into fourteen major sections as follows: a. Section I to Xlll inclusive contains all replacement parts for the complete airplane. Each section is subdivided and each division includes an illustration and a parts listing. b. Section XIV is the Miscellaneous Group. This group includes an illustration and parts list for the Placards and Exterior Stencils and a listing of the Optional Equipment Kits, Repair Kits and Special Tools. 2. The following is a brief explanation of the columns in the parts lists: (Refer to EXAMPLE below). a. The FIGURE AND INDEX NUMBER column indicates the illustration figure number and its part index number. EXAMPLE: (2-1), the 2 is the figure number and the 1 is the index number. The figure number appears only at the top of each parts list page. b. The PART NUMBER column contains the identifying number of the replacement part and this number must be shown on all parts orders. c. The CODE column is for the purpose of indicating special uses of the part. An explanation of the letter code used is shown on the grid (page) preceding each parts listing and pertains to that listing only. d. The NOMENCLATURE column indicates the part name. This name must be shown on all parts orders. e. The NO. REQ. (Number Required) column represents the total quantity of parts used per figure when the part is not indented and the quantity of parts used per assembly when the part is indented. The symbol AR listed in this column means As Required. f. The SERIAL NUMBERS AFFECTED column indicates the part application by airplane serial number. EXAMPLE Figure and Part No. SERIAL NUMBERS Index Number Code NOMENCLATURE Req. AFFECTED Number 2-1 XXXXX-XX DOOR ASSEMBLY - Baggage compartment X -2 XXXXX-XX * TUBE ASSEMBLY - Baggage door latch X -3 XXXXX-XX * * CLEVIS - Door latch tube assembly X -4 XXXXX-XX * * CLIP - Door latch tube assembly X In the nomenclature column, the next higher assembly relationship of items covered is shown by the degree of indention of each item and is indicated by an asterisk (*). One asterisk signifies one indention, two signifies two indentions, etc. The example listing above is interpreted as follows: If the DOOR ASSEMBLY (not indented) is ordered, it will include the three items indented under the DOOR ASSEMBLY. If the TUBE ASSEMBLY (indented one space) is ordered, it will include the two items indented under the TUBE ASSEMBLY. If you want only a CLEVIS or CLIP, you order only that item. PIPER AIRCRAFT PA-34-220T AIRPLANE PARTS CATALOG 1A4 Reissued: November 29, 1993

3. Piper Aircraft will supply all attaching parts to its customers in any quantity. When purchasing the attaching parts such as nuts, bolts, washers, cotter pins, etc. from Piper Aircraft, the customer or service center need only order the part(s) needed. However, parts such as rivets or consumables may have requirements in economical measures, such as pounds, gallons, etc. 4. All items of Optional Equipment are contained in the parts list in their proper sequence and sections. These items were not marked optional, since they are fully identified by their descriptions. 5. The Installation Drawings listed at the beginning of each figure are available for purchase. All other drawings are proprietary and not for sale. Contact your local Piper Distributor for more information. HOW TO IDENTIFY A PART IF YOU KNOW WHAT IT LOOKS LIKE AND KNOW WHERE IT IS LOCATED 1. Refer to Figure 1 to determine the section number in which the part is used. 2. Refer to the Table of Contents and locate the section. Note the figure numbers that illustrate the various subgroups of this main section. Select the figure title you think might contain the part you wish to identify and proceed to the grid (page) specified. If you don't find the part on this illustration, try another figure in this group. 3. Refer to Figure and Index Number in the parts listing for description of the part. HOW TO ORDER PARTS When ordering parts for your Piper Airplanes, please observe the following instructions: 1. Place your order with your local distributor or service center. 2. Specify the model and serial number of your airplane. 3. Specify Part Number, Name, Type and Quantity Required. 4. Specify the method of shipment - Freight, express, parcel post, air express, air freight or air parcel post. Where the nature of the shipment requires it or when no instructions are given, we reserve the right to ship the most suitable way. 5. Request price and delivery information prior to order placement. GENERAL INFORMATION 1. Shortages All orders are checked before leaving our Shipping Department. A packing slip is enclosed with the shipment. Claims for errors or shortages must be made within three days after receipt of orders. 2. Returned Goods No material should be returned without first securing written permission. Material sent in without notice will be held at the owner's risk for thirty days and will then be disposed of as we see fit. Transportation charges must be prepaid on returned goods or the shipment will be refused. 3. Transportation Liabilities The Piper Aircraft Corporation cannot be held liable for damages to parts in transit from the factory. If a shipment is received in a damaged condition, have the delivery man or transportation company make a notation of the damage and file your claim with the carrier. In case of concealed damage, do not attempt to remove the part from the shipping container, or try to repair the damage, call the carrier and have their claim agent inspect the damage before filing your claim with the carrier. PIPER AIRCRAFT PA-34-220T AIRPLANE PARTS CATALOG 1A5 Reissued: November 29, 1993

PIPER AIRCRAFT PA-34-220T AIRPLANE PARTS CATALOG 1A6 P A-34-220T SERIAL NUMBER INFORMA TION The serial numbers of the PA-34-220T aircraft covered by this Parts Catalog are as follows: (Seneca III 14 Volt, Seneca III 28 Volt, and Seneca IV aircraft are included in these serial numbers.) 34-8133001 thru 34-8133277 34-8233001 thru 34-8233205 34-8333001 thru 34-8333129 34-8433001 thru 34-8433088 34-8533001 thru 34-8533069 34-8633001 thru 34-8633031 3433001 and up 3448005 and up SERIAL NUMBER EXPLANATION The serial number on the Manufacturer's Identification Plate is based on either a 3 or 4 set numbering system. In the 4-set system, the first set defines the Type Certificate Designation, the second set is the Model Year, the third set is the Model Code, while the fourth set is the Model Sequence Number (within a model year). The 3-set system omits the model year* and begins a new sequence with 3433001. This new sequence continues without renumbering for a new year. EXAMPLE 34 81 33 001 TYPE CERTIFICATE DESIGNATION MODEL SEQUENCE NUMBER (within a model year) *MODEL YEAR MODEL CODE (33 = PA-34-220T SENECA III 14 VOLT) EXAMPLE 34 33 001 34 48 001 TYPE CERTIFICATE DESIGNATION MODEL SEQUENCE NUMBER (without regard for model year) MODEL CODE (33 = PA-34-220T SENECA III 14 VOLT) (48 = PA-34-220T SENECA III 28 VOLT AND PA-34-220T SENECA IV) Reissued: November 29, 1993

STANDARD PAINT CHART MFG. PIPER PART NUMBER NO. QUART GALLON EXTERIOR POLYURETHANE ENAMEL (Dupont Imron) Baja Yellow H7850U 4175 461 1175 461 Juneau White H7848U 4175 462 1175 462 Ocala Orange H7857UM 4175 463 1175 463 Madrid Red H7851UM 4175 464 1175 464 Bahama Blue H7853U 4175 465 1175 465 Alvocado H7852U 4175 466 1175 466 Las Vegas Gold 5242U 4176 121 1176 121 Dakota Black 99U 4175 467 1175 467 Denver Brown H7859U 4176 122 1176 122 Matador Red H7858U 4175 468 1175 468 Royal Blue H7856U 4175 469 1175 469 Hickory Brown H7855U 4175 470 1175 470 Silver 4531U 4176 123 1176 123 Lime Green H7854U 4175 460 1175 460 Sage Green K7887U 4176 132 1175 460 Firethorn K7888UW 4176 133 1176 133 Buckskin K7890U 4176 135 1176 135 Dark Blue K7891U 4176 136 1176 136 Platinum Gray N7819U 4176 126 1176 126 Sandalwood Tan N7818U 4176 127 1176 127 Dark Claret K7886U 4176 131 1176 131 Burnished Gold N8068U 4763 528 1763 528 Light Blue K8149U 4763 529 1763 529 Dark Saddle N8070U 4763 530 1763 530 Dark Green N8071U 4763 531 1763 531 Saffron K7889UH 4763 532 1763 532 Light Sandalwood W8275 4763 533 1763 533 Light Platinum W8274 4763 534 1763 534 Catalyst (Activator) 912S 4179 950 1179 950 Reducer Y8485S 4179 145 1179 145 Retarder 8100S 4179 599 1179 599 Accelerator 189S 4179 951 POLYURETHANE PRIMER (Dupont Imron) Wash Primer B9287 4170 766 1179 766 Wash Primer Thinner K1733 4179 452 1179 452 Acid Thinner B9289 4179 403 1179 403 INTERIOR INSTRUMENT PANEL Cadet Dark Grey 170 902 Grey II 170 907 NOTE: SEE SERVICE SPARES LETTER 407 FOR AVAILABILITY OF COLOR PAINT FOR THERMOPLASTIC INTERIOR PANELS. PIPER AIRCRAFT PA-34-220T AIRPLANE PARTS CATALOG 1A7 Reissued: November 29, 1993

THIS PAGE INTENTIONALLY LEFT BLANK PIPER AIRCRAFT PA-34-220T AIRPLANE PARTS CATALOG 1A8 Reissued: November 29, 1993

TABLE OF CONTENTS FIGURE NUMBER FIGURE TITLE GRID NUMBER 1 Complete Airplane.....................................................................................................................1A15, 2A15, 3A15 SECTION I WING GROUP 2 Wing Installation............................................................................................................................... 1A17 3 Wing Leading Edge Assembly......................................................................................................... 1A22 4 Wing Trailing Edge Assembly........................................................................................................... 1B5 5 Aileron Assembly.............................................................................................................................. 1B10 6 Flap Assembly.................................................................................................................................. 1B13 SECTION II FUSELAGE GROUP 7 Fuselage Assembly - Complete....................................................................................................... 1B17 8 Fuselage Nose Cone Assembly....................................................................................................... 1B20 9 Fuselage Upper Forward Cockpit Assembly.................................................................................... 1B23 10 Fuselage Upper Center Cockpit Assembly...................................................................................... 1C6 11 Fuselage Upper Aft Cockpit Assembly............................................................................................. 1C10 12 Fuselage Lower Forward Cockpit Assembly.................................................................................... 1C13 13 Fuselage Lower Aft Cockpit Assembly............................................................................................. 1C17 14 Fuselage Aft Section........................................................................................................................ 1C21 15 Fuselage Forward Cabin Door......................................................................................................... 1D1 16 Fuselage Aft Cabin Door.................................................................................................................. 1D6 17 Fuselage Aft Cargo Door.................................................................................................................. 1D12 18 Fuselage Forward Baggage Door Assembly.................................................................................... 1D17 19 Fuselage Enclosure Installation....................................................................................................... 1D20 SECTION III TAIL SURFACES GROUP 20 Tail Surfaces Installation................................................................................................................... 1E1 21 Stabilator Assembly.......................................................................................................................... 1E5 22 Fin Assembly.................................................................................................................................... 1E9 23 Rudder Assembly............................................................................................................................. 1E12 SECTION IV LANDING GEAR GROUP 24 Nose Gear Installation...................................................................................................................... 1E15 25 Nose Gear Assembly....................................................................................................................... 1E19 26 Nose Wheel Assembly (Cleveland).................................................................................................. 1E23 26A Nose Wheel Assembly (McCauley).................................................................................................. 1F2 27 Main Gear Installation...................................................................................................................... 1F5 28 Main Gear Assembly........................................................................................................................ 1F9 29 Main Wheel Assembly (Cleveland).................................................................................................. 1F13 30 Brake Assembly............................................................................................................................... 1F16 31 Nose and Main Gear Door Actuation Installations........................................................................... 1F19 32 Brake System Installation................................................................................................................. 1F23 33 Toe Brake Installation....................................................................................................................... 1G2 34 Toe Brake Master Cylinder Assembly.............................................................................................. 1G5 PIPER AIRCRAFT PA-34-220T AIRPLANE PARTS CATALOG 1A9 Reissued: November 29, 1993

TABLE OF CONTENTS FIGURE NUMBER FIGURE TITLE GRID NUMBER SECTION V CABIN EQUIPMENT GROUP 35 Forward Baggage Compartment Finishing Installation.................................................................... 1G9 36 Cockpit Finishing Installation............................................................................................................ 1G12 36A Cockpit Finishing Installation (s/n 3448038 and up)......................................................................... 1G18 37 Window Curtains Installation............................................................................................................ 1G21 37A Window Shades and Reveals Installation (s/n 3448038 and up)..................................................... 1G24 38 Carpet Installation............................................................................................................................ 1H3 39 Forward Fresh Air Duct and Headliner Installation........................................................................... 1H9 39A Forward Fresh Air Duct and Headliner Installation (s/n 3448038 and up)....................................... 1H12 40 Seats Installation.............................................................................................................................. 1H18 41 Vertically Adjustable Front Seat Assembly....................................................................................... 1H24 42 7th Seat Installation.......................................................................................................................... 1I5 43 Aft Facing Seat Assembly - Center.................................................................................................. 1I8 44 Club Seating Installation................................................................................................................... 1I11 SECTION VI INSTRUMENTS GROUP 45 Instrument Panel Installation (14 Volt System)................................................................................. 1I17 45A Instrument Panel Installation (28 Volt System, includes s/n 3448001 thru 3448037)................... 1I21 45B Instrument Panel Installation (s/n 3448038 and up)......................................................................... 1J1 46 Gyro Vacuum System Installation .................................................................................................... 1J5 47 Pitot Static System Installation......................................................................................................... 1J8 SECTION VII POWER PLANT GROUP 48 Power Plant Installation.................................................................................................................... 1J13 49 Engine Instrument Lines Installation................................................................................................ 1J17 50 Engine Baffle Installation.................................................................................................................. 1J21 51 Engine Cowl Assembly..................................................................................................................... 1K2 52 Cowl Flap Installation....................................................................................................................... 1K5 53 Two Blade Propeller Assembly (Hartzell)......................................................................................... 1K8 54 Three Blade Propeller Assembly (McCauley).................................................................................. 1K11 55 Propeller Synchrophaser System Installation (s/n 34-8133002 thru 34-8133195)........................... 1K15 55A Propeller Synchrophaser System Installation (s/n 34-8133001, 34-8133196 and up, and 3448001 and up)................................................... 1K18 55B Propeller Unfeathering System Installation (s/n 34-8333001 and up, 3448001 and up).................. 1K21 56 Engine Controls Installation.............................................................................................................. 1L2 57 Quadrant Assembly.......................................................................................................................... 1L6 58 Nacelle Installation........................................................................................................................... 1L9 SECTION VIII FUEL SYSTEM GROUP 59 Fuel System Installation - Wing and Fuselage................................................................................. 2A17 60 Fuel System Installation - Engine..................................................................................................... 2A21 61 Fuel Tank Assemblies...................................................................................................................... 2A24 PIPER AIRCRAFT PA-34-220T AIRPLANE PARTS CATALOG 1A10 Reissued: November 29, 1993

You're Reading a Preview

Piper PA-34-220T SENECA III SENECA IV IPC Parts manual

Description

Reviews

Q&A

Recently Viewed