GROUP INDEX
GENERAL INFORMATION
1
PERIODIC MAINTENANCE
2
ENGINE
3
SHAFT DRIVE
4
FUEL AND LUBRICATION SYSTEM
5
COOLING SYSTEM
6
CHASSIS
7
ELECTRICAL SYSTEM
8
SERVICING INFORMATION
9
EMISSION CONTROL INFORMATION
10
17
16
VL800/TK6 ('06- MODEL)
15
VL800TK5 ('05- MODEL)
14
VL800K5 ('05- MODEL)
13
VL800K4 ('04- MODEL)
12
VL800K3 ('03- MODEL)
11
VL800K2 ('02- MODEL)
SUPPLEMENTS
VL800/C/TK9 (”09 MODEL)
18
VL800/TK7 & TK8 ('07&’08- MODEL)
WIRING DIAGRAM
19
HOW TO USE THIS MANUAL
TO LOCATE WHAT YOU ARE
LOOKING FOR:
1.The text of this manual is divided into sections.
2.The section titles are listed in the GROUP INDEX.
3.Holding the manual as shown at the right will allow you
to find the first page of the section easily.
4. The contents are listed on the first page of each section
to help find the item and page you need.
COMPONENT PARTS AND WORK TO BE DONE
Under the name of each system or unit, is its exploded view. Work instructions and other service information
such as the tightening torque, lubricating points and locking agent points, are provided.
Example: Front wheel
1 Front axle
2 Bearing (R)
3 Front wheel
4 Spacer
5 Bearing (L)
6 Brake disc
7 Spacer
A Front axle
B Brake disc mounting bolt
!
ITEM N
.
m kgf
.
m lb-ft
A 65 6.5 47.0
B 23 2.3 16.5
SYMBOL (For USA)
Listed in the table below are the symbols indicating instructions and other information necessary for
servicing. The meaning of each symbol is also included in the table.
Torque control required.
Data beside it indicates specified
torque.
Apply oil. Use engine oil unless
otherwise specified.
Apply SUZUKI SUPER GREASE “A”.
99000-25030
Apply THREAD LOCK “1342”.
99000-32050
Apply THREAD LOCK SUPER
“1360”.
99000-32130
Apply or use brake fluid.
Apply SUZUKI BOND “1207B”.
99104-31140
Apply THREAD LOCK SUPER
“1303”.
99000-32030
Measure in voltage range.
Measure in current range.
Measure in diode test range.
Measure in continuity test range.
Use special tool.
Use engine coolant.
99000-99032-11X
Use fork oil.
99000-99001-SS8
SYMBOL DEFINITION SYMBOL DEFINITION
Indication of service data.
Apply SUZUKI MOLY PASTE.
99000-25140
"
Apply SUZUKI BOND “1216”.
99104-31160
#
Measure in resistance range.
Apply molybdenum oil solution.
(Mixture of engine oil and SUZUKI
MOLY PASTE in a ratio of 1:1)
SYMBOL (For the other countries)
Listed in the table below are the symbols indicating instructions and other information necessary for
servicing. The meaning of each symbol is also included in the table.
Torque control required.
Data beside it indicates specified
torque.
Apply oil. Use engine oil unless
otherwise specified.
Apply SUZUKI SUPER GREASE “A”.
99000-25010
Apply THREAD LOCK “1342”.
99000-32050
Apply THREAD LOCK SUPER
“1360”.
99000-32130
Apply or use brake fluid.
Apply SUZUKI BOND “1207B”.
99000-31140
Apply THREAD LOCK SUPER
“1303”.
99000-32030
Measure in voltage range.
Measure in current range.
Measure in diode test range.
Measure in continuity test range.
Use special tool.
Use engine coolant.
99000-99032-11X
Use fork oil.
99000-99001-SS8
SYMBOL DEFINITION SYMBOL DEFINITION
Indication of service data.
Apply SUZUKI MOLY PASTE.
99000-25140
"
Apply SUZUKI BOND “1216”.
99104-31160
#
Measure in resistance range.
Apply molybdenum oil solution.
(Mixture of engine oil and SUZUKI
MOLY PASTE in a ratio of 1:1)
GENERAL INFORMATION 1-1
CONTENTS
GENERAL INFORMATION
1
1-2 GENERAL INFORMATION
WARNING/CAUTION/NOTE
Please read this manual and follow its instructions carefully. To emphasize special information, the symbol
and the words WARNING, CAUTION and NOTE have special meanings. Pay special attention to the mes-
sages highlighted by these signal words.
!
Indicates a potential hazard that could result in death or injury.
"
Indicates a potential hazard that could result in motorcycle damage.
NOTE:
Indicates special information to make maintenance easier or instructions clearer.
Please note, however, that the warnings and cautions contained in this manual cannot possibly cover all
potential hazards relating to the servicing, or lack of servicing, of the motorcycle. In addition to the WARN-
INGS and CAUTIONS stated, you must use good judgement and basic mechanical safety principles. If you
are unsure about how to perform a particular service operation, ask a more experienced mechanic for ad-
vice.
GENERAL PRECAUTIONS
!
* Proper service and repair procedures are important for the safety of the service mechanic and
the safety and reliability of the motorcycle.
* When two or more persons work together, pay attention to the safety of each other.
* When it is necessary to run the engine indoors, make sure that exhaust gas is forced outdoors.
* When working with toxic or flammable materials, make sure that the area you work in is well-
ventilated and that you follow all of the material manufacturer’s instructions.
* Never use gasoline as a cleaning solvent.
* To avoid getting burned, do not touch the engine, engine oil, radiator and exhaust system until
they have cooled.
* After servicing the fuel, oil, engine coolant, exhaust or brake systems, check all of the lines and
fittings related to the system for leaks.
GENERAL INFORMATION 1-3
"
* If parts replacement is necessary, replace the parts with Suzuki Genuine Parts or their equiva-
lent.
* When removing parts that are to be reused, keep them arranged in an orderly manner so that
they may be reinstalled in the proper order.
* Be sure to use special tools when instructed.
* Make sure that all parts used in reassembly are clean. Lubricate them when specified.
* Use the specified lubricants, bonds, or sealants.
* When removing the battery, disconnect the - battery lead wire first and then the + battery lead
wire.
* When reconnecting the battery, connect the + battery lead wire first, then the - battery lead
wire. Finally, cover the + battery terminal with the terminal cover.
* When performing service to electrical parts, disconnect the - battery lead wire, unless the
service procedure requires the battery power.
* When tightening cylinder head and crankcase nuts and bolts, tighten the larger sizes first.
Always tighten the nuts and bolts from the inside working out, diagonally and to the specified
torque.
* Whenever you remove oil seals, gaskets, packing, O-rings, self-locking nuts, locking washers,
cotter pins, circlips, and other specified parts, be sure to replace them with new ones. Also,
before installing these new parts, be sure to remove any left over material from the mating
surfaces.
* Never reuse a circlip. When installing a new circlip, take care not to expand the end gap larger
than required to slip the circlip over the shaft. After installing a circlip, always ensure it is
completely seated in its groove and securely fitted.
* Use a torque wrench to tighten fasteners to the specified torque. Wipe off grease and oil if a
thread is smeared with them.
* After reassembling, check parts for tightness and proper operation.
* To protect the environment, do not unlawfully dispose of used motor oil, engine coolant, all
other fluids, batteries, and tires.
* To protect the earth’s natural resources, properly dispose of used motorcycles and parts.
1-4 GENERAL INFORMATION
SERIAL NUMBER LOCATION
The frame serial number or V.I.N. (Vehicle Identification Number) 1 is stamped on the right side of the
steering head pipe. The engine serial number 2 is located on the right side of the crankcase. These numbers
are required especially for registering the machine and ordering spare parts.
* Difference between photograph and actual motorcycle depends on the markets.
RIGHT SIDE LEFT SIDE
SUZUKI VL800K1 (2001-MODEL)
FUEL, OIL AND ENGINE COOLANT RECOMMENDATION
FUEL (For USA and CANADA)
1. Use only unleaded gasoline of at least 87 pump octane ( ) method or 91 octane or higher rated by the
Research Method.
2.Suzuki recommends that customers use alcohol-free unleaded gasoline whenever possible.
3.Use of blended gasoline containing MTBE (Methyl Tertiary Butyl Ether) is permitted.
4. Use of blended gasoline/alcohol fuel is permitted, provided that the fuel contains not more than 10% etha-
nol. Gasoline/alcohol fuel may contain up to 5% methanol if appropriate cosolvents and corrosion inhibitors
are present in it.
5.If the performance of the vehicle is unsatisfactory while using blended gasoline/alcohol fuel, you should
switch to alcohol-free unleaded gasoline.
6.Failure to follow these guidelines could possibly void applicable warranty coverage. Check with your fuel
supplier to make sure that the fuel you intend to use meets the requirements listed above.
FUEL (For the other countries)
Use unleaded gasoline that is graded 91 octane or higher by the Research Method.
GENERAL INFORMATION 1-5
ENGINE OIL (For USA)
SUZUKI recommends the use of SUZUKI PERFORMANCE 4
MOTOR OIL or an oil which is rated SF or SG under the API
(American Petroleum Institute) service classification. The recom-
mended viscosity is SAE 10W/40. If an SAE 10W/40 oil is not
available, select an alternative according to the right chart.
ENGINE OIL (For the other countries)
Use a premium quality 4-stroke motor oil to ensure longer ser-
vice life of your motorcycle. Use only oils which are rated SF or
SG under the API service classification. The recommended vis-
cosity is SAE 10W-40. If an SAE 10W-40 motor oil is not avail-
able, select an alternative according to the right chart.
BRAKE FLUID
# Specification and classification: DOT 4
!
* This motorcycle uses a glycol-based brake fluid. Do not use or mix other types of brake fluid
such as silicone-based and petroleum-based fluids for refilling the system, otherwise serious
damage will result to the brake system.
* Do not use any brake fluid taken from old, used, or unsealed containers.
* Do not re-use brake fluid left over from last servicing or which has been stored for a long period
of time.
MULTIGRADE
TEMP .
GEAR OIL (FINAL DRIVE GEAR OIL)
Use SAE 90 hypoid gear oil which is reted GL-5 under API classification system. If you operate the motor-
cycle where ambient temperature is below 0°C (32°F), use SAE 80 hypoid gear oil.
FRONT FORK OIL
Use SUZUKI FORK OIL SS-08 (#10) or an equivalent fork oil.
ENGINE COOLANT
Since antifreeze also has corrosion- and rust-inhibiting properties, always use engine coolant containing
antifreeze, even if the atmospheric temperature does not go below the freezing point.
Use an antifreeze designed for aluminum radiators. Suzuki recommends the use of SUZUKI COOLANT
antifreeze. If this is not available, use an equivalent antifreeze for aluminum radiators.
Mix only distilled water with the antifreeze. Other types of water can corrode and clog the aluminum radiator.
Mix distilled water and antifreeze at a ratio of 50 : 50 – 40 : 60.
For more information, refer to cooling system section. ($ 6-2)
"
The percentage of antifreeze in the coolant should be between 50 to 60%. If the percentage of
antifreeze is above or below this range the coolant’s frost protection and rust-inhabiting capaci-
ties will be reduced. Always keep the antifreeze content above 50% even if the atmospheric tem-
perature does not go below the freezing point.
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$31.99
Suzuki VL800 VL 800 C50 Intruder Boulevard 01-09 Service Repair Manual
Viewed 25 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$31.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
Description
This is a complete service repair manual for the Suzuki VL800 VL 800 VL800T VL800C Intruder Boulevard C50 C50T spanning from 2001 to 2009. It is the most up-to-date 2009 manual, including supplements for every year and model from 2001 to 2009. The manual is keyword searchable and may also work with 2010, 2011, and 2012 models.
There is no shipping involved, and you can access it instantly. This manual is what motorcycle dealerships use to fix bikes and covers topics such as engine, general information, transmission, chassis, lighting, steering, seats system, clutch, suspension, locks, brakes, lubrication, electrical, frame fuel system, and battery, among others.
With this manual, you can print out the section you need and discard it after use, or print the entire manual and place it in a 3-ring binder for reference. The manual is in Adobe Acrobat format and is compatible with both PC and Mac. Instant delivery ensures no waiting for a CD to arrive via mail.
It is important to note that high-speed internet users are recommended, as some files may be too large for dial-up users. If you are on dial-up, please message for file size confirmation before downloading.
