G-1
SPECIFICATIONS &
APPLICATION HANDBOOK
Edition 32
October 2019
Please note that the performance information included in this book is for
estimation purposes only. It is based on information that Komatsu Ltd. has
but actual figures will vary with the operating conditions, including
material characteristics, site conditions, operator efficiency, etc. Neither
Komatsu Ltd. nor its dealers will guarantee that the machines will perform
as estimated.
Materials and specifications are subject to change without notice.
2019 Komatsu
All Rights Reserved
Printed in Japan
G-2
G-3
More precise index is shown under each section.
GENERAL PREFACE
THE KOMATSU PRODUCT LINE
1 ICT EQUIPMENT 1A ICT BULLDOZERS
1B ICT EXCAVATORS (BACKHOE)
2 CRAWLER TYPE TRACTORS 2A CRAWLER-TYPE TRACTORS
2B BULLDOZERS
2C RIPPERS
2D TOWING WINCHES
2E PIPELAYERS
2F TRIMMING DOZERS
3 EXCAVATORS 3A EXCAVATORS (BACKHOE)
3B LIFTING CAPACITY
3C ATTACHMENTS
3D HYDRAULIC LOADING SHOVELS
3E WHEEL-TYPE EXCAVATORS
3F DEMOLITION
3G SCRAP & MATERIAL HANDLING
3H SPECIAL APPLICATION MACHINES
4 WHEEL LOADERS 4A WHEEL LOADERS
4B WHEEL DOZERS
5 DUMP TRUCKS 5A RIGID DUMP TRUCKS
5B ARTICULATED DUMP TRUCKS
6 MOTOR GRADERS 6 MOTOR GRADERS
7 BACKHOE LOADERS 7 BACKHOE LOADERS
8 SKID STEER LOADERS 8 SKID STEER LOADERS
9 MOBILE CRUSHERS &
RECYCLERS
9 MOBILE CRUSHERS &
RECYCLERS
10 FOREST MACHINES 10 FOREST MACHINES
10A HARVESTERS
10B FORWARDERS
10C TRACKED FELLER BUNCHERS &
HARVESTERS
10D LOG LOADERS
10E EXCAVATOR BASE HARVESTERS &
FELLER BUMCHER
10F HARVESTER HEADS
11 GENERATOR SETS 11 GENERATOR SETS
12 ENGINES 12 ENGINES
13 TIRES 13 TIRES
14 RECOMMENDATION 14A FOR MINING
14B FOR QUARRY
15 PRODUCTIVITY 15A PRODUCTIVITY
15B APPENDIX DATA
16 OWNING &
OPERATING COSTS
16 OWNING & OPERATING COSTS
17 KOMTRAX 17 KOMTRAX
18 UNIT CONVERSION TABLES 18 UNIT CONVERSION TABLES
CONTENTS
G-4
GENERAL
PREFACE
This handbook referes to machine specifications, productivity and owning & operation cost for construction
and mining equipment sold by Komatsu. It serves as a guide for the following cases:
* Estimation of productivity for each machine
* Estimation of owning & operating costs for each machine
* Selection of machines for purchasing equipment
* Selection of machines for performing job
The performance of a machine is determined by its production and operating costs. Important machine
factors that influence production includes the horsepower, operating weight, capacity of work equipment,
traveling speed and types of mechanical, hydraulic and electrical systems. They are referred to in the related
section in the handbook. Some of the significant elements that comprise the operating cost factors are the
consumption of fuel and lubricants, the service life of tires and undercarriage and the repair cost of
components. These expenditures are discussed in the section entitled Owning & Operating Costs.
The data and tables in the handbook are based on Komatsu's bench and field tests, computer analysis and
many years of experience. We continuously conduct tests to improve the reliability of the data. However,
because of the complexity of factors influencing production costs and the deviations that may occur during
the preparation of data, Komatsu does not guarantee that the data is exact and that the performance shown
in the handbook is always obtainable with the given job conditions.
The basic performance data in the handbook are the values when machines are used at ideal efficiency. As
performance varies with operator's skill, ground and weather conditions, etc., in reality, the basic data needs
to be modified by using the various factors included in the handbook, resulting in different figures depending
on the selection of these factors. Owning and operating cost also varies depending upon the machine usage,
and the calculation result differs by what job condition and factors are applied for the calculation. Therefore, it
should be understood that the calculated figures do not always completely match the actual measured data.
Nevertheless, handbook users will be able to make proper approximate calculations based on the data given
in the handbook, their work experience and knowledge of local conditions.
The data in the handbook is accurate at the time of printing; however, Komatsu may make changes in the
specifications and materials without notice. Changes are made because of Komatsu's fundamental program
of conducting continuous improvements on its products. Therefore, when you need the most updated
information or specifications, obtain the latest catalogs through your distributor.
This handbook contains machine models produced in the various areas in the world. Specifications may vary
depending upon production location; all models are not always available everywhere in the world.
The final objective for an owner of equipment is to perform the necessary job with the best efficiency and
safety. It is desirable for an owner to understand the job efficiency factors and the machine use factors before
utilizing this handbook.
They are as follows:
1. Job efficiency factors
1) Skill of operator
In order to obtain high productivity, the skill of the operator needs to match the performance of the
machine. It is essential that the operator has the knowledge and skill to obtain high productivity from the
machine.
Therefore, operators should be given education and training about machine operation, job operations
and safety. The operator must read and understand the operator's manual. The operator must also read
and understand the safety manual of the applicable manufacturers association in each area (AEM in
USA, CECE in Europe, etc). The employer should assess the skill of each operator and assign the
operator to an appropriate job. The operator should be given clear job instruction.
Preface
G-5
GENERAL
2) Selection of type of machine and specification
The contractor should select the kind, size and specification of machine that can obtain the optimum job
efficiency. The contractor can use his past results and experience to select the most appropriate
machine. If the contractor is uncertain about the proper machine selection, it is recommended that the
contractor consult with the Komatsu distributor or the Komatsu application engineer. They have
abundant information and experience and can provide valuable assistance in machine selection.
3) Selection of construction method
To attain the job objective, the contractor must select the proper method of the job. The contractor can
choose the optimal method of the job and the optimal process by past actual result or experience. If the
contractor is uncertain about the selection, it is recommended that the contractor consult a Komatsu
application engineer. Komatsu has a program called OFR (Optimum Fleet Recommendation), whitch
provides suitable recommendations for optimal method of the job.
4) Choice and use of attachments and optional parts
Care should be taken in the selection of attachments or optional parts since they affect work efficiency
and safety. Typical attachments and optional parts are shown in this handbook. Komatsu has additional
attachments and optional parts. You can consult with the distributor, salesman, or Komatsu application
engineer for additional details.
5) Use of special application machine
This handbook includes relatively popular special application machines (modified machine for special
application), but does not include every special application machine because of the limited number of
pages. Komatsu will evaluate individual special application work which is not shown in this handbook
and may create a special application machine to meet job requirements. You can consult with the
distributor, salesman, or application engineer of Komatsu.
2. Machine use factors
1) Operator's protection from hazard
The employer has a duty to secure the safety of operators. They must not start work until they
understand the machines to be used, method of the job site, and until they check and confirm that the
operator is protected from all potential hazards.
If an additional protection device is needed on the machine for operator protection, the Komatsu
distributor should be consulted.
The owner of a machine for the purpose of raising productivity and durability may want to modify a
machine. In such a case, any modifications and attachment installations that may endanger the
operator must not be carried out. For example, modifications that hinder an operator's field of view,
hinder operation of a machine, hinder access to a machine or worsen the function of brake, steering
and ROPS, stability of a machine, etc., must not be performed.
2) Protection from breakdown or lessening of machine life
In order to lower O&O cost, it is important to lengthen the economical life of a machine while reducing
machine failure. Therefore, the owner of a machine needs to address the following items:
Understand the method and the condition of job site, and choose the type, size, and specification of
machine that has ample strength for the job. Komatsu machines are equipped with the adequate
strength and structure for typical work. However, when the machine is used in special applications,
special strengthening and/or the addition of protection structures may be needed. In such a case, it
is recommended that Komatsu should be consulted through the distributor. If the owner of the
machine makes modification himself without consulting Komatsu, there are risks of generating
problems in the performance, durability and safety of the machine.
To increase production or durability, the owner of a machine may want to convert a main part of the
machine or attachments himself, or may want to put attachments other than a Komatsu design which
is procured locally, even if it is not a special application. In such a case, it is recommended that
Komatsu be consulted through the distributor. Komatsu will propose through the distributor the
proper means to respond to the request of a customer. If the owner of the machine makes
modification himself without consulting Komatsu, there are risks of generating problems in the
performance, durability and safety of the machine.
Preface
G-6
GENERAL
3) Prevention of fire
The owner and operator of a machine must follow the machine's maintenance guidelines and manage
the job so that danger of fire will be minimized. A fire breaks out mainly by leakage of fuel, oil and
grease; by electrical shorts caused from fatigue, loosening, or rubbing of electric parts and by ignition
from engine high temperature parts contacting combustibles, such as plants and papers.
The owner of a machine needs to maintain a machine by daily checks so that the causes described
above do not exist.
The operator must confirm by walk-around check before starting the machine that the above-
mentioned hazards do not exist. If any problems are found, the machine must not be started until the
problems are fixed.
Equip a machine with a fire extinguisher in preparation for emergency.
4) Consideration of safety around the machine and environment.
Exercise care regarding safety, vibration, noise and flying debris (soil and stone) for the people who
work around machines and for the surrounding area before putting a machine into a job site.
Due to carelessness, the people working around the machine may suffer injury when the machine
reverses, turns, and the attachment moves, etc. In order to prevent injuries, Komatsu can offer
hazard alarm equipment and hazard detection equipment on its machines. The owner of the
machine should evaluate whether the equipment on the machine are enough to cover the job site
condition and should equip the machine and the people with additional equipment if needed.
Komatsu sells machines that conform to the surrounding noise level regulation in the area sold.
However, when it is necessary to have lower noise than a regulation level of the area, it is possible to
reduce noise levels by modifying the machine. You are requested to consult Komatsu through its
distributor.
It is quite difficult to prevent the vibration of the land and flying debris by modification of the machine.
Such problems should be solved by changing the work condition.
5) Compliance with regulations
Regulations pertaining to safety, noise, engine exhaust gas, etc. vary in different areas of the world. The
owner of a machine has to recognize the regulations about the safety and environment legislated by
each country and local government against equipment, and has to use machines that conform to the
applicable regulations. Although Komatsu supplies machines that conform to each regulation in the
world, it is necessary to confirm through the Komatsu distributor if the machine conforms to all
regulations in that area, before putting the machine to work.
Occasionally, a machine manufactured for another area in the world may be moved and relocated
without Komatsu's knowledge. In this case, the machine may not have the specifications or structure to
satisfy regulations of the area where the machine is located. In such a case, check in advance to
determine if it conforms to the regulation of the area. If it does not conform, the owner must either make
the necessary modifications to the machine to make it conform, or not operate the machine there.
6) Appropriate maintenance and management of a machine
The most important factor to maximize machine operation is performing maintenance and management
of the machine correctly. It is essential to perform daily check & maintenance and periodic inspection &
maintenance procedures shown in the operation manual of each machine.
Preface
G-7
GENERAL
BULLDOZERS
Horsepower 32.4 to 858 kW (43.4 to 1,150 HP)
SWAMP BULLDOZERS
Horsepower 32.4 to 197 kW (43.4 to 264 HP)
D575ASD-3
D85PX-15E0
D85PX-15R
D85PX-18
D65P-12
D65PX-16
D65PX-18
D61PX-23M0
D61PX-24
D51PX-22
D51PX-24
D39PX-22
D39PX-24
D37PX-22
D37PX-24
D31PX-22 D21P-8E0
D68ESS-12E0
D39EX-22
D39EX-24
D37EX-22 D31EX-22 D21A-8E0 D61EX-23M0
D61EX-24 D37EX-24
D51EX-22
D51EX-24
D85EX-15
D85EX-15E0
D85EX-15R
D85EX-18
D85ESS-2
D85ESS-2A
D575A-3 D475ASD-5E0 D475A-5E0 D375A-5D
D375A-6
D375A-6R
D375A-8
PIPELAYERS
Horsepower 168 to 269 kW (225 to 360 HP)
ICT BULLDOZERS
Horsepower 66.1 to 264 kW (88.6 to 354 HP)
D355C-3 D155C-1 D85C-21
D65E-12
D65EX-16
D65EX-17
D65EX-18
D65WX-18
D155A-5D
D155A-6
D155AX-6
D155AX-7
D155AX-8
D275A-5D
D275AX-5E0
D275A-5R
D85EXi-18
D85PXi-18
D65EXi-18
D65PXi-18
D155AXi-8 D61EXi-24
D61PXi-24
D39EXi-24
D39PXi-24
D37EXi-24
D37PXi-24
D51EXi-24
D51PXi-24
The Komatsu
Product Line
G-8
GENERAL
HYDRAULIC EXCAVA TORS (Backhoe )
Operating weight 890 to approx. 759,000 kg (1,960 to approx. 1,673,600 lb)
PC8000-6
PC8000E-6
PC2000-8
PC2000-11
PC1250-7, PC1250-8 (R)
PC1250LC-8, PC1250-11
PC1250LC-11
PC195LC-8 PC160LC-8
PC170LC-10
PC170LC-11
PC130-7
PC130-8
PC130-8M0
PC130F-7
PC138US-8
PC138USLC-10
PC138US-11
PC138USLC-11
PC118MR-8 PC110-8M0
PC60-8
PC70-8
PC71-7
PC80MR-3
PC80MR-5
PC88MR-8
PC88MR-10
PC78US-8
PC78UU-8
PC78US-10
PC210-8M0
PC210LC-8M0
PC210NLC-8
PC210LC-10
PC210-10M0
PC210LC-10M0
PC210-11
PC210LC-11
PC210NLC-11
PC270LC-8
PC270-8 PC240LC-8
PC240LC-8M0
PC240LC-10
PC240LC-11
PC240NLC-11
PC228US-8
PC228USLC-8
PC228USLC-10
PC228USLC-11
PC220-8
PC220-8M0
PC220LC-8
PC220LC-8M0
PC230NHD-11 PC238USLC-11
PC200-8
PC200-8M0
PC200F-8M0
PC200LC-8
PC200LC-8M0
PC450-7
PC450LC-7
PC450-8 (R)
PC450LC-8 (R)
PC460LC-8
PC550LC-8
PC400-7
PC430-8
PC400LC-7
PC400-8 (R)
PC400LC-8 (R)
PC500LC-8 (R)
PC500LC-10M0 (R)
PC490LC-10
PC490-11
PC490LC-11
PC45MR-3
PC45MR-5
PC55MR-3
PC55MR-5
HB335LC-1
HB365LC-1
HB365LC-3
HB365NLC-3
HB205-1M0
HB215LC-1M0
HB215LC-2
HB215LC-3
PC490LCi-11 PC360LCi-11 PC210LCi-10
PC210LCi-11
PC30MR-3
PC30MR-5
PC35MR-3
PC35MR-5
PC18MR-3
PC20MR-3
PC22MR-3
PC26MR-3
PC14R-3
PC16R-3
PC09-1
PC350LC-7
PC350-8
PC350-8M0
PC350LC-8
PC350LC-8M0
PC390LC-8M0
PC390LC-11 PC360LC-10
PC360LC-11
PC360NLC-11
PC360-8M0 PC300LC-7
PC300-8
PC308USLC-3E0
PC300-8M0
PC300LC-8
PC300LC-8M0
PC290LC-8
PC290LC-10
PC290LC-11
PC290NLC-11
PC850-8E0 (R1) PC800-8E0 (R1)
PC800LC-8E0 (R1)
PC600-8E0 (R1)
PC600LC-8E0 (R1)
PC700LC-8E0 (R)
PC700LC-11
PC650LC-8E0
PC650LC-11
PC5500-6
PC5500E-6
PC7000-6
PC7000E-6
PC4000-6
PC4000-11
PC4000E-6
PC3000-6
PC3000E-6
HYBRID EXCAVATORS
Operating weight 20,200 to approx. 36,700 kg (44,530 to approx. 80,910 lb)
ICT EXCAVATORS
Operating weight 22,410 to approx. 47,500 kg (50,300 to approx. 104,720 lb)
The Komatsu
Product Line
G-9
GENERAL
WHEEL LOADERS
Bucket capacity 0.6 to 20 m
3
(0.8 to 26.2 yd
3
)
WHEEL DOZERS
Horsepower 362 to 637 kW (485 to 853 HP)
SKID STEER LOADERS
Bucket capacity 0.23 to 0.40 m
3
(0.30 to 0.52 yd
3
)
WA1200-6
WA470-5
WA470-6 (R)
WA470-7
WA470-8
WA380-5
WA380-6
WA380Z-6
WA380-7
WA380-8
WA200-5
WA200-6
WA200PZ-6
WA200-7
WA200-8
WA150-5
WA150-6
WA100M-7
WA100M-8
WD900-3
SK815-5E0 SK714-5 SK820-5E0 SK510-5
WD600-3
WD600-6 (R)
WA70-7
WA80M-7
WA50-6
WA430-5
WA430-6
WA320-5
WA320-6
WA320PZ-6
WA320-7
WA320-8
WA250-5
WA250-6
WA250PZ-6
WA270-7
WA270-8
WA800-3 (E0) WA700-3 WA600-3
WA600-6 (R)
WA600-8
WA500-3
WA500-6 (R)
WA500-7
WA500-8
WA480-6 (R)
WA480-8
HYDRAULIC EXCAVATORS (Loading shovel)
Operating weight 43,100 to approx. 740,000 kg (95,020 to approx. 1,631,700 lb)
HYDRAULIC EXCAVATORS (Wheel type)
Operating weight 10,500 to 19,840kg (23,150 to 43,740 lb)
PC8000-6
PC8000E-6
PC7000-6
PC7000E-6
PC5500-6
PC5500E-6
PC600-8E0 (R1)
PC600LC-8E0 (R1)
PC2000-8 PC1250-7
PC1250-8 (R)
PW180-10
PW180-11
PW98MR-10 PW160-10
PW160-11
PW148-10
PW148-11
PW118MR-11
PC800-8E0 (R1) PC400-7
PC400LC-7
PC400-8 (R)
PC400LC-8 (R)
PC4000-6
PC4000E-6
PC4000-11
PC3000-6
PC3000E-6
WA900-3 (E0)
WA900-8
The Komatsu
Product Line
G-10
GENERAL
MOTOR GRADERS
Horsepower 108 to 209 kW (145 to 280 HP)
ARTICULATED DUMP TRUCKS
Hauling capacity 27.3 to 40 ton (30.1 to 44.1 US ton)
GD825A-2 GD705-5 GD755-5R GD655-5
GD655-6
GD675-5
GD675-6
GD535-5
GD555-5
HM400-3
HM400-3M0 (R)
HM400-5
HM350-2
HD405-7 (R)
HD405-8
HD325-7 (R)
HD325-8
RIGID DUMP TRUCKS
Hauling capacity 36.5 to 369.4 ton (40 to 407.2 US ton)
930E-4 PMO
930E-4SE PMO
960E-2 PMO
960E-2K PMO
980E-4 PMO
830E-AC PMO
860E-1K PMO
HD1500-7
HD1500-8
HM300-2 (R)
HM300-3
HM300-5
HD785-7
HD605-7E0 (R)
HD605-8
HD465-7E0 (R)
HD465-8
730E-8 PMO
BACKHOE LOADERS
Bucket capacity 1.03 to 1.10 m
3
(1.35 to 1.43 yd
3
)
WB97S-5E0
WB97R-5E0
WB93S-5E0
WB93R-8
The Komatsu
Product Line
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$32.99
Komatsu Illustrated Specifications & HandBook Full VERSION-
Viewed 63 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$32.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
Description
Get access to the comprehensive Komatsu Illustrated Specifications & Handbook Full Version for all Komatsu heavy equipment, including dozers, loaders, track hoes, and more. This manual spans almost 1000 pages, providing a wealth of technical information essential for professional mechanics and DIY enthusiasts alike.
