tUNGHEINRICH ETVQ 20/25
01.03 0.1 (SB)
CONTENTS
Operating Instructions 1
Auxiliary mechanical steering system 2
Service Manual Items 3
tUNGHEINRICH ETVQ 20/25
01.03 0.1 (SB)
Service Manual Items
Item Service
Manual No.
ETM/V- and ETVQ-MSE vehicles - Pedal adjustment B 6365.01
Checking the electronic controllers/drives switches
for shaft-controlled trucks, sit-on and stand-on trucks
equipped with an impulse drive current control
system
B 6970.21
Mikropuls 516 F and 526 F - Drive control system B 6970.25
Electric steering system ETV-Q F 6970.31
Retrak series hoist frame assembly instructions G 1005
ETM/V 13,5 - 20 MSE series vehicles Checking and
adjusting the hoist frame tilting mechanism
G 6026.02
ETM/V 10-25 MSE, ETVQ 20/25 - Checking and ad¬
justing of hoist frames incorporating "lipless" sections
G 6233.04
Length check of load chains G 6355.01
ETM/V 20 MSE series vehicles - Checking and ad¬
justing the fork tilting system
G1 6132.01
Fork Arms G1 6401.01
Hydaulic Cylinder (Fabr. Freimuth) H 6640.01
Electronic drive control unit for hydraulic systems -
Adjustment
I 6621.03
Lowering brakes and pipe failure safety devices I 6632.01
Item Service
Manual No.
Instructions for the prevention of accidents and da¬
mage to equipment when performing servicing,
checking and repair operations on fork lift trucks
equipped with electronic assemblies
J 6900.09
JAG contactors, series 99 013 730
JAG change-over assembly, series 99 013 720
J 6912.01
Contactor Wiring J 6912.03
Series ET-MSE - Adjustment of battery cable run K 6925.01
Instructions for the prevention of functional failures
and damage to equipment when performing cleaning
operations on fork lift truck
Z 0000.15
List of lubricants for HJC-fork lift trucks Z 6500.01
Mechanische Ersatzlenkung (IT)
Mekanisk reservestyring
(DK)
Direccion mecanica de recambio
(T)
Direction mecanique de secours
(T)
Auxiliary mechanical steering system
(gD
Sterzo meccanico (T)
Mekanisk reservestyring
(7T)
Mechanische hulpbesturing
(nl)
Mekanisk reservstyrning (IT)
1000 3788
04.98
ETVQ
20/25
08.96-
Important Instructions for Transporting and Assembling Reach
Truck Masts
Transport
Depending on the height of the mast and local conditions, the truck can be
transported in three different ways:
- Vertically, with the mast assembled (for low heights).
- Vertically, with the mast partially assembled and leaning against the overhead
guard (for medium heights), lifting hydraulic line disconnected.
- Vertically, with the mast dismantled (for large heights), all hydraulic lines between
the basic truck and the mast separated.
Safety Instructions for Assembly and Commissioning
'stop) On site assembly of the truck, commissioning and driver instruction may only be
carried out by personnel trained and authorised by the manufacturer.
The hydraulic lines may only be connected to the basic truck / mast interface and the
truck commissioned once the mast has been properly assembled.
CO
O
CO
o
cr>
o
Foreword
The present ORIGINAL OPERATING INSTRUCTIONS are designed to provide suf¬
ficient instruction for the safe operation of the industrial truck. The information is pro¬
vided clearly and concisely. The chapters are arranged by letter. Each chapter starts
with page 1. The page identification consists of a chapter letter and a page number.
For example: Page B 2 is the second page in chapter B.
The operating instructions detail different truck models. When operating and servicing
the truck, make sure that the instructions apply to your truck model.
Safety instructions and important explanations are indicated by the following gra¬
phics:
(jffi)
Used before safety instructions which must be observed to avoid danger to person-
w
nel.
Used before notices which must be observed to avoid material damage.
U'Tp
Used before notices and explanations.
•
Used to indicate standard equipment.
O Used to indicate optional equipment.
Our trucks are subject to ongoing development. Jungheinrich reserves the right to al¬
ter the design, equipment and technical features of the truck. No guarantee of partic¬
ular features of the truck should therefore be assumed from the present operating in¬
structions.
Copyright
Copyright of these operating instructions remains with JUNGHEINRICH AG
Jungheinrich Aktiengesellschaft
Am Stadtrand 35
D-22047 Hamburg - Germany
Telephone: +49 (0) 40/6948-0
www.jungheinrich.com
CO
O
o
in
o
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$37.99
1989-2002 Jungheinrich Electric Reach Truck ETVQ20, ETVQ25 Service & Repair Manual
Viewed 11 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$37.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
Description
These illustrated factory workshop service manuals are designed for Jungheinrich Electric Reach Truck Type ETVQ. They contain high-quality images, circuit diagrams, and instructions to assist in the operation and repair of the truck. The manuals are printable and searchable, making them useful for both professional mechanics and DIY enthusiasts.
- Covered models:
- ETVQ20 (08.1989-04.2002)
- ETVQ25 (08.1989-04.2002)
- Language: English
- Contained set of manuals:
- Operating manual, 61 Pages
- Service manual, 165 Pages
The manuals include detailed information on various components and systems, such as the auxiliary mechanical steering system, drive control systems, hoist frame assembly, fork tilting system, hydraulic cylinder, electronic drive control unit, and more. They also provide instructions for safety, prevention of accidents, and maintenance operations. Additionally, a list of lubricants for HJC-fork lift trucks is included.
