05.15 -
05.15
51423150
ETR 230/235
Operating Instructions u
2
3
Foreword
Notes about the Operating Instructions
All forklift truck users should be familiar with their Local, Regional, and National
regulations. United States users should be familiar with the Occupational Safety and
Health Administration (OSHA) regulations and standards, and ANSI/ITSDF B56.1,
Safety Standard for Low Lift and High Lift Trucks.
Safe operation of the industrial truck requires special knowledge, which is acquired
from these Operating Instructions, from the training required by OSHA under 29 CFR
1910.178, and by training operators in factory installations and their functions. Safe
operation of the industrial truck also requires knowledge that can be acquired from
these ORIGINAL OPERATING INSTRUCTIONS. Information is set out concisely and
in a clear format. The chapters are arranged by letter and the pages are numbered
sequentially.
Various types of industrial trucks are described in these Operating Instructions. When
operating the industrial truck and carrying out maintenance work, make certain you
use the description corresponding to your industrial truck type.
See www.osha.gov web site for more information on Regulations (Standards – 29
CFR) Powered industrial trucks – 1910.178. See www.itsdf.org web site for more
information on the B56.1 Safety Standards for Low Lift and High Lift Trucks.
Safety instructions and important information together with their relative importance
are indicated by the following safety warning symbols and indicator words:
DANGER!
Danger indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING!
Warning indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION!
Caution indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
4
NOTICE
Notice is used to address practices not related to personal injury.
Z This message appears if special information, instructions, or indications are
needed with regard to procedures, equipment, tools, pressures, loads, and other
special data.
t Denotes standard equipment
o Denotes optional equipment
5
Copyright
Copyright of this operating manual remains with Jungheinrich AG.
Distributed by
MCFA
2121 W. SAM HOUSTON PARKWAY N.
HOUSTON, TX 77043-2305
FAX: 713-365-1414
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$42.99
Jungheinrich Electric Reach Truck ETR230, ETR235, ETR335D, ETR340, ETR345 Workshop Service Manual
Viewed 85 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$42.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
Description
- The Original Illustrated Factory Workshop Service Manual for Jungheinrich Electric Reach Truck Type ETR is an essential resource for owners and operators of Jungheinrich Forklift Trucks.
- This comprehensive manual covers various models, including the ETR230, ETR235, ETR335D, ETR340, and ETR345, all manufactured from May 2014 onwards.
- It consists of a set of manuals available in English, including two operating manuals for specific models: ETR230/235 and ETR335D/340/345.
- The operating manuals span 146 and 142 pages respectively, providing comprehensive guidance on operating these specific models.
- Additionally, a 292-page service manual is included, offering detailed information on safety, component layout, technical specifications, and operating instructions for the covered models.
- The service manual also contains wiring diagrams for electrical and hydraulic systems, parameters, event messages, general tightening torques, and information on BUS systems used.
- Detailed coverage of various components and systems such as drive brake, display, control, electrical components, wheels, protective mechanisms, hydraulic system, and more is provided.
- The manual offers step-by-step instructions, disassembly/assembly guides, and functional verification procedures to ensure proper functioning and safety of the reach truck.
- Illustrations, circuit diagrams, and searchable text are included to enhance understanding and ease of navigation.
- This manual is a valuable resource for both novice and experienced operators, enabling confident operation and maintenance of Jungheinrich Electric Reach Trucks.
