Linde Electric Pallet Truck Type 360: T16L Operating Instructions (User Manual)

These original factory manuals for Linde Electric Pallet Truck Type 360 are essential resources for both professional mechanics and DIY enthusiasts. The manuals contain high-quality images, circuit diagrams, and detailed instructions to assist in the operation and repair of the truck.

• Covered models: T16L
• Format: 105 Pages
• Language: English

The contents of the manual include:

1. Introduction
   • Your Linde truck
   • Impermissible use
   • Description of use and climatic conditions
   • Specific use of the truck
   • Symbols used
   • Technical description
   • EC declaration of conformity
2. Safety
   • Residual risks
   • Stability
   • Safety regulations
   • Handling consumables
   • Periodic general checks on trucks
3. General views
   • Plates and labels
   • General view T16L type 360
   • T16L type 360 controls
   • Combined hour meter / battery discharge indicator
4. Use
   • Operating instructions
   • T16L driving
   • Braking system, horn
   • Use of the truck on a slope
   • Using the lifting device / T16L capacity
   • Handling loads
   • Slinging, lifting, towing the truck
5. Maintenance
   • Maintenance
   • Technical inspection and maintenance characteristics
   • Recommended lubricants
   • Daily checks before starting work
   • Checking the direction controls
   • Checking the lift/lower controls of the fork arms
   • Checking the lifting/lowering controls of the mast
   • Check braking
   • Testing the safety devices
   • Checking the battery charge status
   • Opening the battery cover
   • Connect / disconnect the battery plug
   • Charging the battery with the built-in charger
   • Recharging the battery with an external charger
   • Checking the condition of the cables, terminals, and battery connector
   • Specific mast maintenance
   • Service plan as required
   • Cleaning the truck
   • Cleaning the battery and battery compartment
   • Battery maintenance
   • Battery with vertical access
   • Wheels, check the fixing
   • Wheels, check the state
   • Opening the front cover
   • Pull the flexible cover clear to access the reduction gearbox and the motor
   • Checking the fuses
   • Inspection and maintenance overview
   • Service plan as required
   • 500h Service plan
   • 1000h Service plan
   • 2000h Service plan
   • Traction motor
   • Inspection/replacement of the traction motor brushes
   • Gearbox
   • Transmission: checking the oil level in the reducer
   • Steering / braking / wheels
   • Checking and adjusting the brake control
   • Checking and adjusting the belt tension
   • Adjusting the height of the stabilizer wheels
   • Electromagnetic brake, controlling the tiller foot pull switch
   • Electrical equipment
   • Electrical system: checking the condition and fastening of electrical cables and connections
   • Cleaning the electrical panel
   • Hydraulic circuits
   • Checking the hydraulic fluid level
   • Draining the hydraulic circuit
   • Lift mast
   • Work on the lifting mast
6. Technical specification
   • Datasheet T16L type 360

Annex

1. Diagrams
   • Circuit diagram for T16L type 360
   • Hydraulic diagram for T16L Type 360