Linde Electric Pallet Stacker Type 1172: L10, L10B, L12, L12I Operating Instructions (User Manual)

These factory manuals for Linde Forklift Trucks are essential resources for operating and repairing your truck. They contain high-quality images, circuit diagrams, and detailed instructions. The manuals cover models L10, L10B, L12, and L12I, and are available in English with a total of 148 pages.

• Introduction
  • Your truck
  • Impermissible use
  • Description of use and climatic conditions
  • Specific use of the equipment
  • Symbols used
  • Legal requirements for placing on the market
  • Technical description
• Safety
  • Residual risks
  • Stability
  • Operation of industrial trucks in plant area
  • Competent person
  • Safety regulations
  • Driving regulations
  • Handling consumables
  • Periodic general checks on the trucks
• General views
  • Labels
  • Identification label
  • General view
  • Actuation controls
  • Battery charge indicator
  • Digicode option (LFM Go)
  • LFM Access-LFM Basic option
• Use
  • Commissioning
  • Checks before first use
  • Daily checks before use
  • Checking the working environment
  • General information on batteries
  • Using the on-board charger
  • Adjusting the on-board charger
  • Operating instructions for 1172
  • Driving the 1172
  • Cold store usage (optional)
  • Creep Speed function
  • Proportional Speed Function (Proportional Speed)
  • Use of the truck on a slope
  • Braking, lifting, lowering, horn
  • Initial lift function (only on the L12i model)
  • Load handling
  • Reading the capacity rating plate
  • Emergency mast lowering
  • Slinging, lifting
  • Truck towing procedure
  • Transporting the machine
  • Storage of truck
• Maintenance
  • General information
  • Calendar of testing and maintenance operations
  • Recommended lubricants
  • Technical data for inspection and maintenance
  • Daily checks before starting work
  • Checking the direction of travel controls
  • Checking the lifting/lowering controls
  • Testing the safety devices
  • Checking the battery charging state
  • Maintenance schedule as required
  • Cleaning the truck and the mast
  • Opening/closing the battery cover and battery socket
  • Cleaning the battery and its compartment
  • Access to the technical compartment
  • Servicing wheels and rollers
  • Battery
  • Battery charging using an external charger
  • Charging the battery using the on-board charger
  • Replacing the battery
  • Inspection and maintenance overview
  • 1000 hour service plan
  • 2000 hour service plan
  • 5000 hour service plan
  • Forks
  • Checking the forks
  • Transmission
  • Servicing the transmission gear
  • Steering/Wheels/Braking
  • Checking the brakes
  • Check the brake air gap
  • Adjusting the height of the stabiliser wheel
  • Electrical equipment
  • Maintaining the electrical system
  • Checking the condition of cables, terminals and battery connector
  • Servicing the battery
  • Checking the on-board charger
  • Hydraulic systems
  • Checking the oil level and sealing of the hydraulic system
  • Servicing the pump motor
  • Maintaining the hydraulic system
  • Lift mast
  • Working on the lift mast
  • Specific mast maintenance
• Technical datasheet
  • Technical specification
  • Noise emission values

Annex

• Diagrams
  • Electric diagrams
  • L10-L12
  • L12I
  • Options
  • Hydraulic diagrams