Linde Order Picker Type 149: N20, N25, numbers before P02002 Operating Instructions (User Manual)

These original factory manuals for Linde Order Picker Type 149 are essential resources for both professional mechanics and DIY enthusiasts. The manuals contain high-quality images, circuit diagrams, and detailed instructions to assist with the operation and repair of your truck.

Covered models:

• N20: SN before P02002
• N25: SN before P02002

Specifications:

• Format: 48 Pages
• Language: English

Contents:

• Description
• Plates and labels
• Technical data
• Technical description
• General view
• Controls
• Indicators
• Combined running-time meter (operation)
• Battery discharge indicator
• Before operation I Daily checks and tasks before commissioning
• Safety rules
• Definition of terms relating to safety
• Use of lubricants
• Periodic checks of truck
• Advice for initial use
• Checks prior to initial operation
• Daily checks before use
• Checking FORW/BACK and lift/lower controls
• Check electrical steering
• Checking safety braking
• Checking operation of the emergency stop button
• Check operation of the horn
• Checking the battery charge
• Opening battery cover
• Connecting/disconnecting battery connector
• Recharging the battery with an external charger
• Closing and locking battery cover
• Checking level of electrolyte and water supplement
• Checking electrolyte specific gravity
• Removing/replacing the battery
• Safety locking of battery
• Changing battery with a pulley
• Changing battery with a wheeled trolley (option)
• Operation
• Requirements for use
• Starting up
• Emergency stop button
• Direction of travel identification
• Forward/reverse travel
• Direction of travel reversal
• Operation with driver off the truck
• Starting on a slope
• Steering
• Steering direction in forward travel
• Alarm, braking, raising/lowering
• Horn operation
• Regenerative braking
• LDC automatic braking
• Electro-hydraulic braking
• Lifting/lowering the fork
• Handling loads
• Picking the load up
• Transporting a load
• Putting the load down
• Picking up the load at the first level
• Before leaving the truck
• Truck automatic standby
• Lifting and towing
• Slinging the truck
• Lifting the pallet truck
• Towing
• Transporting and storing the truck
• Maintenance
• General information
• Checks and maintenance work after the first 50 hours of service *
• Inspection and maintenance schedule 27
• Maintenance as required
• Cleaning the truck
• Opening motors compartment covers
• Checking the tightness and condition of the wheels
• Fixing and adjusting the stabiliser wheel
• Checking the fuses
• Removing the platform surface covering
• Cleaning of steering ring pinions
• Checking the locking and adjustment of the battery cover handle
• Handling the sensitive matting of the operating platform
• Checking level of electrolyte and water supplement
• Checking electrolyte specific gravity
• Checking the condition of battery connector, terminals and cables
• Cleaning the battery and its compartment
• 500 hour maintenance
• Greasing the turntable bearing of the motor unit
• Cleaning of steering ring and pinions
• Checking reduction gear oil level
• Checking hydraulic oil level
• Checking tightness of hydraulic circuit
• Checking condition and fixing of electrical cables and connections
• Cleaning and checking wear of contacts
• Checking and if necessary changing traction motor brushes
• Checking and if necessary changing steering motor brushes
• Adjusting the electromagnetic brake
• Checking the various hinges
• Checking the locking and adjustment of the battery cover handle
• 1000 hour maintenance
• Checking and if necessary changing pump motor brushes
• Cleaning the hydraulic filter
• Checking mechanical fixing of the components
• 2000 hour maintenance
• Replacing the hydraulic oil
• Replacing the reduction gear oil
• Recommended lubricants
• Hydraulic system diagram
• Electrical system diagram
• Index